£7.75 delivery on orders excluding certain products & postcodes *
This product is part of the Network Rail/Railtrack RT98 System M21 and N2
Jotun Marathon is a two component epoxy coating. It is a high solids, high build, glass reinforced product which is scratch and abrasion resistant. It is suitable for environments with very high corrosivity. Jotun Marathon is multi-functional and can be used as a primer, mid or finish coat or as a single coat system in atmospheric and immersed environments.
Jotun Marathon is suitable for properly prepared concrete and coated surfaces and is available in a selected range of colours.
Jotun Marathon is for use in areas where high scratch resistance is required. It is suitable for structural steel and piping which is exposed to highly corrosive environments and immersed structures and substrates. Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel. Compatible with cathodic protection systems.
Jotun Marathon is a two component polyamine cured epoxy coating. It is a high solids, high build, glass flake reinforced product. It is scratch and abrasion resistant. Suitable for environments with very high corrosivity. Can be used as primer, mid coat, finish coat or as single coat system in atmospheric and immersed environments. Suitable for properly prepared carbon steel and concrete substrates.
Jotun Marathon should be applied with an airless spray. For stripe coating and small areas, a brush should be used but care must be taken to ensure the specified dry film thickness is achieved.
Jotun Marathon application to surfaces which are clean, dry and free from contamination, will secure lasting adhesion. However, Marathon is a protective coating which is suitable for structural steel and piping in highly corrosive and immersed environments. It is recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general steel structures.
Components: | Two Part |
Type: | Polyamine cured epoxy coating |
Finish: | Gloss |
Stock Colours: | Black, Red, Grey and White |
Tintable: | Selected Range of Colours. Please note, bespoke tints are non refundable / exchangable. |
VOC Content: | 248.0g per litre |
Volume Solids: | 80% |
Suitable Substrates: | Suitable for properly prepared carbon steel and concrete substrates |
Application Method: | Airless Spray, Brush |
Theoretical Coverage: | 4 - 2m2 per litre |
Wet Film Thickness (WFT): | 250 - 500 microns |
Dry Film Thickness (DFT): | 200 - 400 microns |
Induction Time: | - |
Pot Life: | 1 hour at 23°C |
Touch Dry: | 14 hours at 10°C |
Overcoatable: | 30 hours at 10°C |
Fully Cured: | 15 days at 10°C |
Cleaner / Thinner: | Jotun Thinner No. 17 |
Shelf Life: | 48 months |
Packaging: | Available in 20 Litres |