Jotun Pioner Topcoat *CLEARANCE*

SKU
ID17041
UN1263 (Class: 3, Pk Grp: III)
A quick drying single pack acrylic resin based topcoat for use as a finishing coat for application to either steel or concrete substrates.
Available in 5 Litres
From £50.78 £42.32
In stock
Only %1 left
Product Description

Please note, this product is discontinued. We have a small quantity of stock available - Get it before it is gone!

See Jotun Pilot ACR as the replacement product.

Jotun Pioner Topcoat is a one component, semi gloss, quick drying protective acrylic topcoat for industrial, topside and superstructure. To be used as topcoat in atmospheric environments.

Jotun Pioner Topcoat is a quick drying, single pack, acrylic resin based topcoat. It is recommended as a finishing coat for applications to concrete or steel substrates. Pioner Topcoat is suitable for exterior and interior applications and in a variety of climatic conditions. Jotun Pioner Topcoat is available in a wide choice of colour options from the Multicolour Industry (MCI) tinting system.

Best Uses

Jotun Pioner Topcoat is a finishing coat which provides protection for concrete and steel substrates which are found in interior and exterior environments and a range of climatic conditions. Jotun Pioner Topcoat is water resistant, quick drying and may be applied at low temperatures. Recommended for topside and superstructure. Suitable for a wide range of industrial structures.

Application

Jotun Pioner Topcoat may be suitable for application to other substrates, subject to an adhesion test. Pioneer Topcoat should be applied with an airless spray. A brush can be used for stripe coating and for small areas, a roller may be used. If using a brush or roller, care must be taken to ensure the specified dry film thickness is achieved.

Surface and Environment

All surfaces should be clean, dry and free from contamination. Surfaces should be assessed and treated in accordance with ISO 8504. Previously coated surfaces should be clean, dry, undamaged and primed with a compatible and appropriate primer. Jotun Pioner Topcoat is recommended for marine topside and superstructure surfaces and also as a protective top coating for industrial structures.

Technical Details

Approvals

  • Jotun Pioner Topcoat  is HAPAS approved to specification 2903
  • Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8

Technical Info

Components: One Part
Type: Physically drying acrylic coating
Finish: Semi Gloss
Stock Colours: Grey
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable.
VOC Content: 571.0g per litre
Volume Solids: 34%
Suitable Substrates: Compatible previously coated substrates
Application Method: Airless Spray, Brush or Roller
Theoretical Coverage: 8.5 - 5.7m2 per litre
Wet Film Thickness (WFT): 120 - 180 microns
Dry Film Thickness (DFT): 40 - 60 microns
Induction Time: -
Pot Life: -
Touch Dry: 45 mins at 10°C
Overcoatable: 4 hours at 10°C
Fully Cured:  
Cleaner / Thinner: Jotun Thinner No. 7
Shelf Life: 48 months
Packaging: Available in 5 Litres

Related Products