Jotun Alkydprimer

SKU
ID17057
UN1263 (Class: 3, Pk Grp: III)
An easy to use one component alkyd primer featuring good adhesion properties and surface tolerance.
Available in 5 and 20 Litres
From £43.84 £36.53
In stock
Only %1 left
Product Description

Jotun Alkydprimer is an easy to use one component alkyd primer featuring good adhesion properties and surface tolerance. It provides a flat finish.

Best Uses

Jotun Alkydprimer paint has been developed for priming suitable prepared steel and aluminium structures. Alkydprimer is certified for spread of flame and is certified in accordance with IMO FTPC Part 5 (IMO Res. A.653(16)) / IMO FTPC Annex2 Item 2.2.

A further benefit of the Jotun Alkydprimer paint is its resistance up to 120°C dry heat. If a matt topcoat is required then Jotun Alkydprimer can be used. Suitable for a wide range of industrial structures. Recommended for touch-up purposes on Marine substrates.

Application

To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Use air spray or airless spray. Brush recommended for stripe coating and small areas. Care must be taken to achieve the specified dry film thickness. Roller may be used for small areas. Not recommended for first primer coat. Care must be taken to achieve the specified dry film thickness.

Technical Details

Approvals

  • Low Flame Spread in accordance with EU Directive for Marine Equipment. Approved in accordance with parts 5 and 2 of Annex 1 of IMO 2010 FTP Code, or Parts 5 and 2 of Annex 1 of IMO FTPC when in compliance with IMO 2010 FTP Code Ch. 8

Technical Info

Components: One Part
Type: Oxidatively drying alkyd coating
Finish: Matt
Stock Colours: Black, Grey, Light Grey, Red, White
Tintable: No
VOC Content: 391.0g per litre
Volume Solids: 52%
Suitable Substrates: Carbon steel, aluminium and substrates
Application Method: Air Spray, Airless Spray, Brush or Roller
Theoretical Coverage: 17.3 - 10.4m2 per litre
Wet Film Thickness (WFT): 60 - 95 microns
Dry Film Thickness (DFT): 30 - 50 microns
Induction Time: -
Pot Life: -
Touch Dry: 3.5 hours at 10°C
Overcoatable: 22 hours at 10°C
Fully Cured:  
Cleaner / Thinner: Jotun Thinner No. 2
Shelf Life: 48 months
Packaging: Available in 5 and 20 Litres

Related Products