Jotun Muki Z 3000 is a two component inorganic medium zinc moisture curing zinc ethyl silicate coating. Formulated as a shop primer designed for high welding and cutting speed, giving reduced weld porosity and back burning.
Jotun Muki Z 3000 is fast drying and has good abrasion resistance making it suitable for stacking shortly after application. Can be used as temporary primer in a new construction phase or as primer in a complete coating system in atmospheric and immersed environments. Suitable for properly prepared carbon steel substrates and recommended to be applied in an automated shop priming line. Compatible with advanced welding technologies including MIG, MAG and GFCAW.
Suitable as shop primer for entire vessels. Suitable for structural steel and piping to be exposed to corrosive environments up to very high and immersed. Recommended for offshore environments, refineries, power plants, bridges, buildings, mining equipment and general structural steel.
Prepare carbon steel to Sa 2 1/2. Apply via air spray or airless spray. Use a brush for touch up purposes. To secure lasting adhesion to the subsequent product all surfaces shall be clean, dry and free from any contamination. Follow application guide on technical tab.
- Approved for PSPC for Water Ballast Tanks according to IMO Res. MSC 215(82)
- Welding approved according to DVS-guideline 0501
- Type approved shop primer for Germanischer Lloyd
- Type approved shop primer according to PSPC IMO Res. MSC 82/W
- Type approved shop primer by RMSR
- Health approved for use as shop primer by FORCE institute
|Type:||Inorganic medium zinc moisture curing zinc ethyl silicate coating|
|Stock Colours:||Green and Grey|
|VOC Content:||639.0g per Litre|
|Suitable Substrates:||For properly prepared carbon steel substrates|
|Application Method:||Air Spray, Airless Spray. Brush for Touch Up|
|Theoretical Coverage:||14 - 18.7 m2 per litre|
|Wet Film Thickness (WFT):||55 - 70 microns|
|Dry Film Thickness (DFT):||15 - 20 microns|
|Touch Dry:||1 minute at 23°C|
|Overcoatable:||2 days at 23°C|
|Fully Cured:||2 days at 23°C|
|Cleaner / Thinner:||Jotun Thinner No. 4 for fast evaporation or Jotun Thinner No. 25 for slow evaporation|
|Shelf Life:||Part A: 6 months, Part B: 24 months|
|Packaging:||Available in 16 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.