The store will not work correctly when cookies are disabled.
JavaScript seems to be disabled in your browser.
For the best experience on our site, be sure to turn on Javascript in your browser.
Jotun Tankguard DW
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II)
A two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks.
Product Description
Jotun Tankguard DW is a two component solvent free amine cured epoxy coating. It is specially designed for potable drinking water tanks. Can be used as primer and finish coat in atmospheric and immersed environments.
Best Uses
Tankguard DW is suitable for properly prepared carbon steel, stainless steel, composites and concrete substrates.
Tankguard DW is recommended coating for potable water tanks when performance, application properties and certificates are important with the following benefits:
Excellent application properties
Designed for use in drinking water tanks
Benzyl Alcohol free – no risk of taste or smell
Minimum 10°C substrate temperature
Approved for water up to 60°C
Technical Details
Approvals
WRAS Approved (Number 1705552)
Approved to BS 6920-1:2000 for contact with potable water.
Approved by the Norwegian Institute of Public Health for use in contact with potable water.
In compliance with Federal Drug Authority, USA, FDA Title 21, Part 175.300, approved for exposure to dry foods.
Meets the requirements of ANSI/AWWA standard C210-07. Suitable for water pipelines.
Norsok M-501 System 3A
Technical Info
Components:
Two Part
Type:
Solvent free amine cured epoxy coating
Finish:
Gloss
Stock Colours:
Light Grey, White
Tintable:
No
VOC Content:
2.0g per litre
Volume Solids:
100%
Suitable Substrates:
Carbon steel, stainless steel, composites and concrete substrates.
Application Method:
Airless Spray, Brush or Roller
Theoretical Coverage:
6.7 - 2.5m2 per litre
Wet Film Thickness (WFT):
150 - 400 microns
Dry Film Thickness (DFT):
150 - 400 microns
Induction Time:
5 mins at 23°C
Pot Life:
30 mins at 23°C
Touch Dry:
15 hours at 10°C
Overcoatable:
25 hours at 10°C
Fully Cured:
14 days at 10°C
Cleaner / Thinner:
Do not add thinner. Clean prior to application with Jotun Thinner No. 28 , and afterwards with Jotun Thinner No.17
Shelf Life:
12 months
Packaging:
Available in 15 Litres
Related Products
Jotun Thinner No. 17
For use with Jotamastic, Penguard, Jotacote Universal and Barrier range of paints.
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
PPG SigmaGuard CSF 585
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.