KEIM Contact Plus Grob

SKU
id10257
Non Hazardous
A highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.
Available in 5 and 25 Kg in White
From £110.70 £92.25
In stock
Only %1 left
Product Description

Keim Contact Plus Grob is a highly filled silicate based priming coat, used as a bonding bridge between sound, existing coatings and Keim Mineral Paints.

Best Uses

Keim Contact Plus Grob contains glass fibres and silicate minerals in consistent grain sizes and shapes.

Keim Contact Plus Grob is used for application onto sound, previously painted surfaces in preparation for coating using Keim Mineral Paints and/or for filling hairline cracks up to 1mm in width and to equalise differences in substrate texture

Application

Dilute Keim Contact Plus Grob with Keim Granital Dilution 1 litre per 10kg. Apply uniformly with brush or roller. Ambient and substrate temperature above 5°C. and below 30°C. Do not apply in direct sunlight or onto sun-heated surfaces, or if it is raining or if there is an immediate likelihood of rain.

Keim Contact Plus Grob must be over coated with one or two coats of Keim Granital, Keim Royalan, Keim Soldalit or Keim Concretal W. With light colours apply only one opaque finishing coat undiluted. Darker colours may require two subsequent coats. Allow at least 12 hours drying time between individual coats.
For the best finish possible, Promain recommend the use of KEIM's Façade Brush for the best application.

Technical Details

Approvals & Certifications

  • Cradle to Cradle Certified™ Silver

Notes

  • Dilute Keim Contact Plus Grob Bonding bridge between a previously painted substrate and subsequent coats of Keim Mineral Paint
  • Can fill cracks up to max. of 1mm in width
  • Equalises textures
  • UV resistant Non flammable Breathable
  • Non film forming

Technical Info

Components: Single Pack
Type: Silicate Based
Finish: -
Stock Colours: White 
Tintable: No
VOC Content: -
Material Characteristics: Specific Weight: 1.74g/cm3, Maximum grain size: 1mm
Suitable Substrates: Used for application onto sound, previously painted surfaces in preparation for coating using Keim Mineral Paints
Application Method: Brush or Roller
Theoretical Coverage: Approx 0.5kg/m2 Keim Contact Plus Grob
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): -
Induction Time: -
Pot Life: -
Touch Dry: -
Overcoatable: Allow at least 12 hours drying time between individual coats
Fully Cured: -
Cleaner / Thinner: Clean tools with water immediately after use
Shelf Life: Approx. 12 months, if kept cool, but frost free in tightly closed containers
Packaging: Available in 5kg and 25kg containers

Related Products