Keim Concretal C is a waterproof sol silicate based paint formulated for protection against carbonation and chlorides to be used on most concrete surfaces and mineral substrates.
Carbonation is a major factor in concrete decay, caused by CO2 from the atmosphere reducing the alkalinity of concrete. In turn, this allows the reinforcing steel to become susceptible to attack by water and oxygen, resulting in corrosion of the steel and spalling of the concrete.
Keim Concretal C protects concrete from penetration of CO2 from the air, protects from corrosion and frost damage due to its elevated water-repellency, and from external chloride corrosion due to the absence of water movement. Keim Concretal C protects against all causes of decay in concrete, including carbonation, weathering, water absorption and chloride corrosion. Available in a full range of colours.
Two coats are required, with the first coat to be applied by a brush or roller and a final coat to be applied after a minimum of 12 hours undiluted in a like manner.
For the best finish possible, Promain recommend the use of KEIM's Facade Brush for the best application.
- Protect from frost and store in dry conditions
- Solvent free
- Carbonation protection
- Highly obliterative
- Made using pure inorganic fillers and pigments
|Tintable:||Yes. Please note, bespoke tints are non refundable / exchangeable|
|Suitable Substrates:||For use on most concrete surfaces and mineral substrates|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||Approx. 0.3 kg/m2 for two coats|
|Application Conditions:||Ambient and substrate temperature above 5°C and below 30°C|
|Overcoatable:||After a minimum period of 12 hours a final coat of KEIM Concretal C may be applied undiluted in a like manner|
|Cleaner / Thinner:||Clean tools with water immediately after use|
|Shelf Life:||Approx. 12 months if kept dry, cool, but frost-free in tightly closed containers|
|Packaging:||Available in 5 kg & 20 kg containers|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.