£7.75 delivery on orders excluding certain products & postcodes *
KEIM Wax Coating is suitable for all mineral surfaces and for surfaces which have been treated with KEIM Mineral Paints. The product is made with polymers and synthetic water-based wax and is designed to be easily removed and re-applied. Graffiti can be removed using a high pressure sprayer or by using KEIM Wax Coating Graffiti Cleaner. KEIM Wax Coating has a low sheen finish and does not significantly darken the surface to which it is applied.
Remove any graffiti using a high pressure sprayer or by using Keim Graffiti Cleaner. All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim Wax Coating may proceed.
We would recommend that a two coat Keim Anti-Graffiti Wax Coating system be used, applied with 4 hours between coats. Each coat is applied working from the top downwards by low-pressure spray (hold the nozzle 10-20cm from the surface), apply the first coat horizontally and then the second coat vertically (cross-coats) thus ensuring that all facets of the substrate are well coated. Application using brush, roller or an airless spray gun is also possible. To effect the removal of subsequent graffiti damage, for best results remove as soon as possible after the graffiti has been applied. Graffiti can be removed using a high pressure sprayer (80°C at a pressure of 60-90 BAR).
Components: | Single Pack |
Type: | Polymers and Water Based Wax |
Finish: | - |
Stock Colours: | Clear |
Tintable: | No. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | All mineral surfaces |
Application Method: | Brush, Roller or Airless Spray |
Theoretical Coverage: | Approx. 0.25 – 0.3 lt/m2 (for two coats) |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | - |
Dust Dry: | 1 hour at 20°C |
Non-Sticky: | 2 hours at 20°C |
Overcoatable: | After 4 hours at 20°C |
Loadable: | Approx. 2 x 24 hours 20°C |
Cleaner / Thinner: | Clean tools with water immediately after use |
Shelf Life: | 24 months if kept dry, cool and frost free in tightly closed container |
Packaging: | Available in 5 Litres |