KEIM I.F. Primer Formerly I.G. Primer

SKU
ID19935
UN1263 (Class: 3, Pk Grp: II)
a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining.
Available in 5 Litres in Clear
£182.10 £151.75
In stock
Product Description

Keim I.F. Primer is a nitro-collodium, colourless primer with good water vapour permeability used to obliterate staining.

Best Uses

Keim I.F. Primer is a colourless primer with good water vapour permeability used for obliterate stains. I.F. Primer has been developed as a nitro-collodium primer particularly suitable for substrates that are contaminated with soot, nicotine and tar. Keim I.F. Primer is also suitable for consolidating friable substrates. This product is suitable for interior and exterior use.

Keim I.F. offers high water vapour permeability as well as consolidating the surface creating a sound strong surface. A Further benefit offered by this primer is that it is water repellent and is resistant to yellowing.

Application

All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants apply Keim I.F. Primer by brush. 

It is usually sufficient to apply only one coat of Keim I.F. Primer. For extremely strong contamination a second coat is recommended.

KEIM I.F. Primer is part of the extensive range of Keim products available from Promain.

Technical Details

Notes

  • Good water permeability
  • Will obliterate stains such as soot, nicotine and tar

Technical Info

Components: Single Pack
Type: Nitro-collodium
Finish: -
Stock Colours: Colourless
Tintable: No
VOC Content: -
Volume Solids: -
Suitable Substrates: Particularly for substrates that are contaminated with soot, nicotine and tar and to consolidate substrates
Application Method: Brush or Roller
Theoretical Coverage: 10m2 per litre
Application Conditions: Ambient and substrate temperature above 5°C and below 30°C
Application: For extremely strong contamination a second coat is recommended with 4 hours between coats
Overcoatable: After a waiting time of approx. 5 hours Keim I.G. Primer can be over coated with any of the KEIM Mineral Paint systems
Cleaner / Thinner: Clean tools immediately after use with cellulose thinner or similar
Shelf Life: Approx. 12 months, if kept cool but frost free in tightly closed containers
Packaging: Available in 5 Litres