£7.75 delivery on orders excluding certain products & postcodes *
Keim Silan 100 is ideal where surfaces are exposed to de-icing salts and to protect reinforcing steel from chloride corrosion due to salt penetration. This product can also be used as a primer prior to top coating with Keim products or just a stand alone water repellent finish.
Keim Silan 100 should be applied as two wet on wet flood coats or as a single flood coat by brush or low pressure spray. If required within a period of up to 12 hours, and these times are critical, the first coat of Keim top coat must be applied. Ambient and substrate temperature should be between 5° and 30°C. Non absorbent surfaces cannot be treated with Keim Silan 100.
Components: | Single Pack |
Type: | Solvent Free |
Finish: | - |
Stock Colours: | Colourless |
Tintable: | No |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | Mineral building materials - especially concrete |
Application Method: | Brush or Low Pressure Spray |
Theoretical Coverage: | 0.2lt/m2 for one coat, 0.3lt/m2 for two coats |
Application Conditions: | Ambient and substrate temperature above 5°C and below 30°C |
Cleaner / Thinner: | Clean tools with water immediately after use |
Shelf Life: | Approx. 12 months, if kept cool but frost free in tightly closed containers |
Packaging: | Available in 5 Litres |