KEIM Design Fixativ

Keim Design Fixativ is used as pre treatment for highly absorbent substrates and as dilution for Keim Design Lasur.

Best Uses

Keim Design Fixativ is a dilution and primer formulated for the Keim Design Lasur system. Keim Design Fixativ Dilution is weather and UV resistant, non flammable, and water vapour permeable. This product is non film forming, microporous and has no solvents and plasticisers added.

Application

All loose, flaking and unstable material must be identified and then thoroughly removed, all surfaces must be thoroughly washed down with clean cold water to remove all surface dirt and dust. When all surfaces are clean, sound, wind dry, dust free and free from all surface contaminants, application of Keim Design Fixativ may proceed.

Keim Design Fixativ should be applied by brush or roller, working well into all surfaces. After a minimum period of 12 hours the Keim Design Lasur system may be applied. Cover surfaces which are not to be painted, in particular glass, natural stone, ceramics etc.

Keim Design Fixativ is part of the extensive range of Keim products available from Promain.