Keim STS 7M is a non hazardous paint stripper based on aromatic hydrocarbons formulated for the removal of existing or old paint coatings from substrates prior to the application of Keim Mineral Paint systems.
KEIM STS 7M Paint Stripper is designed for removal of existing or old paint coatings from substrates prior to the application of Keim Mineral Paint systems. Keim STS 7M is particularly well suited for the removal of plastic paints i.e. acrylic and latex.
Keim STS 7M should be stirred well before use. To achieve good results when using a brush, a flat brush with natural bristles is recommended. Keim STS 7M should be liberally applied by brush, the coat of paint stripper should be thicker than the coat of paint that is to be removed. To get the best performance, once applied, the surfaces should be covered in thin protective plastic film to prevent the product from prematurely drying out. Keim STS 7M should be allowed to remain undisturbed for between 30 minutes and 30 hours depending upon the number and thickness of paint layers. Keim STS 7M should be applied and left protected overnight. Paint should then be dissolved and removed either using a scraper, brush used with warm water or a high pressure hot water washer. Where gaps or delamination exists between
underlying paint coats it may be necessary to apply several coats of Keim STS 7M.
|Colour:||Light blue paste.|
|Consumption:||0.3 - 1 Kg per m2 depending on number of paint layers .|
|Cleaner / Thinner:||Clean tools immediately with water.|
|Shelf Life:||12 months in unopened containers at frost free temperatures.|
|Packaging:||Available in 5 containers.|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.