Mapei Eporip - 2 Part Adhesive Crack Repair and Cementitious Bonding

SKU
id10308
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN2735 (Class: 8, Pk Grp: III)
Two-component solvent free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.
Available in 2 and 10 Kg in Grey
From £48.67 £40.56
In stock
Only %1 left
Product Description

Mapei Eporip is a two component solvent-free epoxy adhesive for construction joints and for monolithic sealing of cracks in screeds.

Eporip is a slightly thixotropic paste that can be applied to both horizontal and vertical surfaces for filling cracks in concrete, bonding steel to concrete, bonding precast concrete elements or for monolithic construction joints between fresh and hardened concrete.

Mapei Eporip polymerises without shrinkage and, after curing, is waterproof, possesses excellent dielectric properties and high mechanical characteristics in addition to its ability to bond concrete and steel.

Best Uses

Mapei Eporip is suitable for use for construction joints for the structural reinforcement of beams and pillars, decayed industrial flooring, rigid waterproof constructions joints, or for sealing cracks in cement screeds.

Consumption

Construction joints with a rough substrate 0.5-0.7 kg/m2. Construction joints with a very uneven substrate 1.0-2.0 kg/m2. Sealing cracks 1.35 kg/l per litre of cavity. Actual consumption depends on irregularities within the substrate and the method used in application.

Application

Thoroughly mix the two components of Mapei Eporip and apply to dry or slightly damp concrete using a paint brush or trowel immediately after mixing.

Technical Details

Features

  • Suitable for application to horizontal and vertical surfaces
  • Bonds steel to concrete
  • Suitable for filling cracks in concrete
  • Do not cast fresh concrete onto hardened Mapei Eporip
  • Do not use Mapei Eporip on dusty, crumbling or loose surfaces
  • Supplied in 2 Kg and 10 Kg kits

Technical Info

Components: Two Pack
Type: Solvent Free Epoxy Adhesive
Finish: -
Stock Colours: Grey
Tintable: No
VOC Content:  
Volume Solids:  
Suitable Substrates: Steel, Concrete
Application Method: Brush, Flat Trowel
Theoretical Coverage: Generally speaking:
– construction joints with
a rough substrate: 0.5-0.7 kg/m2
– construction joints with a very uneven substrate: 1.0-2.0 kg/m3
– sealing cracks: 1.35 kg/l per litre of cavity
– bonding precast elements in concrete, or steel-and-concrete: 1.35 kg/m² per
mm thickness.
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: 5 - 6 hours at 10°C
Surface Dry:  
Overcoatable:  
Fully Cured:  
Cleaner / Thinner: Tools used to prepare and apply Eporip must be cleaned with solvents (ethyl alcohol, xylol, toluene, etc.) immediately after use.
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 2 and 10 Kg

Related Products