Mapei Malech Primer

SKU
ID10247
Non Hazardous
Acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.
Available in 10 Kg
£87.90 £73.25
In stock
Product Description

Mapei Malech is an acrylic resin undercoat in water dispersion to even out the absorption of substrates before applying other products.

Best Uses

Mapei Malech is used as a primer for wall surfaces in general (e.g. concrete or repairs with cement mortars) before applying a coloured finishing coat of Elastocolor range product and Quarzolite range product, as a regulator of the substrate absorption and as an adhesion catalyst.

Mapei Malech can also be used in the Aquaflex System cycle for permanent encapsulation of asbestos as a primer for covering layers of Aquaflex.

  • As a primer on well cured new or old renders as long as they are not damaged, before applying a coloured finishing coat of Elastocolor or Quarzolite range product.
  • As a primer over old paint, even if slightly chalky, before applying Elastocolor, Quarzolite or Colorite coloured finishing coat.
  • As a primer on surfaces that need to be treated in enclosed or poorly ventilated environments because Malech is odourless, before applying Elastocolor or Elastocolor Rasante.

Application

Mapei Malech is a micronized acrylic resin based primer in water dispersion that, once applied on the surface, penetrates better than traditional water based primers. Malech is odourless and solvent free, therefore can be applied in enclose or poorly ventilated environments. Because of Malech's formulation, it ensures the consolidation of chalk present on surfaces that need to be treated.

Technical Details

Features

  • Mapei Malech is ready for use but can be diluted 30-50% of water for surfaces with low absorbency

Technical Info

Components: Single Pack
Type: Acrylic Water Based
Finish:  
Stock Colours: Transparent
Tintable: No
VOC Content: < 5 g/L
Volume Solids: 15%
Suitable Substrates: Render, Old Coatings
Application Method: Brush, Roller or Spray
Theoretical Coverage: 0.10-0.15 kg/m2 depending on the porosity of the substrate.
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT):  
Induction Time: -
Pot Life: -
Surface Dry:  
Overcoatable: 12-24 hours in function of humidity and temperature conditions and, in any case, only when the previous layer is completely dry at 20°C
Fully Cured:  
Cleaner / Thinner: Water
Shelf Life: 2 years minimum in original unopened containers.
Packaging: Available in 2 and 10 Kg