£7.75 delivery on orders excluding certain products & postcodes *
Mapeproof 1K Turbo has been developed for use for waterproofing cementitious screeds, that are not subject to rising damp, but have a residual humidity content higher than the British Standards 75% RH (BS8203) for laying resilient and wood flooring.
Mapeproof 1K Turbo is suitable for consolidating cementitious floor screeds which are mechanically weak, as well as a waterproofing treatment before laying wooden flooring, to prevent a failure due to excessive residual humidity in the cementitious floor screed.
After application and rapid curing of the resin, the substrate treated with Mapeproof 1K Turbo becomes more consistent, harder and is more abrasion resistant.
IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu
Components: | Single Pack |
Type: | Solvent Free |
Finish: | - |
Stock Colours: | Brown |
Tintable: | No |
Density (g/cm³): | 1.20 |
Dry solids content (%): | 100 |
Suitable Substrates: | Cementitious screeds |
Maximum residual humidity permitted | 5%, measured with carbide hygrometer (for screeds thicknesses of approx. 6 cm) |
Brookfield viscosity (at +23°C) (mPa·s): | 300 (# 1 - 10 rpm) |
Application temperature range: | from +5°C to +35°C |
Loss of stickiness: | After 30-40 minutes |
Set to light foot traffic: | 60 minutes |
Final hardening time: | After 2 hours |
Waiting time between each coat: | Minimum 40 minutes, max. 2 hours |
Waiting time before laying directly with adhesive: | Minimum 2 hours, maximum 24 hours |
Shelf Life: | 12 months in its original well-sealed container stored under normal conditions |
Packaging: | Available in 10kg drums |