£7.75 delivery on orders excluding certain products & postcodes *
Plastimul is a solvent-free paste consisting of selected water-emulsified bitumens, special fine-graded aggregates and additives which form a waterproof plastic coating. Plastimul has a thixotropic consistency making it easy to use on flat, curved, vertical and sloping surfaces.
Mapei Plastimul can be used for waterproofing structures below ground level such as foundations, man-made tunnels and underpasses. When completely dry Plastimul will resist re-emulsifying after prolonged immersion in water, even when slightly acid or alkaline and will resist aggressive agents present in soil.
Formulated as a general purpose easy to use bitumen emulsion, Plastimul can be used for waterproofing foundations, bearing walls, underground tunnels and underpasses.
Plastimul is applied by paint brush, roller or spray to a thoroughly cleaned and prepared surface. Two coats of Plastimul are recommended with a final dry thickness of at least 3mm. Plastimul can be diluted with 45-50% water as a primer coat.
Components: | Single Pack |
Type: | Solvent Free |
Finish: | - |
Stock Colours: | Black |
Tintable: | No |
VOC Content: | - |
Dry Solids Content: | Approximately 76% |
Suitable Substrates: | Masonry or concrete |
Application Method: | Trowel, Brush or Spray |
Theoretical Coverage: |
For waterproofing: 1-4 kg/m2 depending on the type of application As an adhesive for insulating panels: 2-3 kg/m2. |
Wet Film Thickness (WFT): | 1.5 mm |
Application Temp: | From +5°C to +35°C |
Induction Time: | - |
Pot Life: | - |
Drying Time: | The drying time varies according to weather conditions, surrounding temperature, level of humidity, wind, the thickness applied and the type of substrate |
Cleaner / Thinner: | Clean tools with water immediately after use |
Shelf Life: | 12 months from date of production unopened |
Packaging: | Available in 20 Kg |