Nullifire TS816WAC - High Build Topseal

SKU
id17899
Non Hazardous
Decorative Topseal for use with Nullifire Intumescent Basecoats.
Available in 5 Litres
From £89.88 £74.90
In stock
Only %1 left
Product Description

Nullifire TS816WAC is a waterborne, acrylic eggshell decorative topseal. It is primarily for use with Nullifire Intumescent Basecoats on internal steelwork.

Best Uses

TS816WAC is primarily used with Nullifire Intumescent Basecoats on internal steelwork. Suitable for internal & semi-exposed environments, it provides a top seal to protect the intumescent coating while also providing an outstanding aesthetic finish to the steelwork.

Nullifire TS816WAC is part of the large range of Fire Retardant and Intumescent Products available from Promain.

Application

Please contact our Technical team for further advice and information before placing your order

Ensure the basecoat surface is sound, dry, clean and free from dirt and grease. If necessary, rub down with wet and dry abrasive paper and then wash down with clean water and allow to dry before applying topseal. TS816WAC should be applied when the air and steel temperatures are above 5ºC and below 25ºC. The relative humidity should be below 80% with a level below 65% being ideal for drying.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details

Notes

  • To ensure the correct thickness is applied in a uniform manner, a wet film gauge should be used.

Technical Info

Components: Single Pack
Type: Waterborne Acrylic Eggshell
Finish: Eggshell - Soft Sheen Washable Finish
Stock Colours: White, Transparent
Tintable: Yes. Please note, bespoke tints are non refundable / exchangeable
VOC Content: -
Volume Solids: Approx 40%
Suitable Substrates: Suitable for steelwork in internal and semi-exposed environments
Application Method: Airless Spray 
Theoretical Coverage: Approx 7.4m2/litre/coat
Wet Film Thickness (WFT): 0.125mm
Dry Film Thickness (DFT): 0.050mm
Induction Time: -
Pot Life: -
Touch Dry: 2-4 hours at 20°C
Overcoatable: -
Hard Dry: 4 Hours at 20°C
Cleaner / Thinner: Do not thin. Clean spray equipment with clean water after use
Shelf Life: 2 years unopened
Packaging: Available in 5 Litres

Related Products