Osmo Intensive Cleaner For Wood is formulated to be a highly effective, alkaline based concentrated cleaner for the removal of organic and inorganic soiling on interior or exterior surfaces.
Osmo Intensive Cleaner For Wood is the ideal alternative to sanding wood surfaces finished with oils and waxes for intensive cleaning and restoration. Osmo Intensive Cleaner does not contain agressive or corrosive alkalis.
- Never apply undiluted. Dilute concentrate 1:10 to 1:20 with water.
- Can also remove top coats of oils and waxes but is not a direct alternative to sanding as Intensive Cleaner is for intensive cleaning purposes only.
- Optimal in connection with Osmo Cleaning Kit For Floors
Remove loose dirt from the surface with a firm broom or hand broom. Dilute the concentrate from 1:10 to 1:20 with water. A trial application is absolutely necessary. Apply Osmo Intensive Cleaner For Wood solution to the dirty surface, loosen dirt and afterwards wipe away with clear water. For mechanical processing on flooring, we recommend using a single disc machine (e.g. Osmo FloorXcenter) with a brush ring, red or green pad. Remove dirt with Osmo Micro-Mop Plush or a lint-free cotton cloth. After drying, recoat oiled or waxed surfaces with an appropriate Osmo wood finish, e.g. Osmo Polyx®-Oil Original.
Surface and Environment
Do not use undiluted. Osmo Intensive Cleaner For Wood may lead to discolourations or surface changes on unfamiliar substrates. Extractive-rich woods (especially Oak) darken when they come in contact with undiluted Intensive Cleaner. Even when diluted, always carry out a trial application. Avoid allowing the solution to dry.
Not suitable for everyday cleaning and maintenance.
- Dilute 1:10 to 1:20 with clean water
|Type:||Alkaline based concentrated cleaner|
|Stock Colours:||8019 Clear|
|Suitable Substrates:||Wooden surfaces treated with oils and waxes|
|Application Method:||Single disc machine,Micro Mop or lint free cotton cloth|
|Theoretical Coverage:||1 litre covers approx. 30-100 m² with one application|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||-|
|Fully Cured:||Allow cleaned surface to dry thoroughly, at least 3-4 hours before beginning surface treatment|
|Cleaner / Thinner:||Clean tools with water|
|Shelf Life:||Up to 2 years and longer if container is kept dry and closed tightly|
|Packaging:||Available in 1 and 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.