£7.75 delivery on orders excluding certain products & postcodes *
PPG Sigma EP 159 Sealer should primarily be used to seal previously painted metal substrates, in order to resist dust and dirt and provide users with a surface that can be easily cleaned in industrial and commercial environments.
PPG Sigma EP 159 Sealer can be applied using airless spray and a brush should only be used for touch up purposes, where spraying would not be appropriate. Sigma EP 159 Sealer is an extremely fast drying product that produces a touch dry finish after 45 minutes and can be recoated after 8 hours if necessary.
PPG Sigma EP 159 Sealer be used internally or externally, as a sealer, to be used on fresh metal sprayed substrates. Please don't hesitate to call us if you require more information on this product.
Components: | Two Components |
Type: | Epoxy Sealer |
Finish: | - |
Stock Colours: | 08C35 |
Tintable: | No |
VOC Content: | 549 g/l |
Volume Solids: | 45% |
Suitable Substrates: | Fresh metal sprayed substrates |
Application Method: | Airless Spray |
Theoretical Coverage: | 12-20 m2 per litre |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | 25 microns |
Induction Time: | - |
Pot Life: | 8 hours at 20°C |
Touch Dry: | 3 hours at 20°C |
Overcoatable: | After minimum 8 hours to maximum of 96 hours at 20°C |
Fully Cured: | days at 20°C |
Cleaner / Thinner: | Clean with PPG Thinner 90-53 |
Shelf Life: | - |
Packaging: | Available in 4 and 20 Litres |