PPG SigmaGlide 1290 is an anti fouling release finish coat based on 100% pure silicone binder technology.
PPG SigmaGlide is an excellent fouling release and resistant product that benefits from low slime pick up and release. Ideal for use on new building, refurbishment and maintenance.
- Reduces vessel fuel consumption
- Regenerating surface with long lasting properties
- High volume solids
- Biocide fee fouling release coating
- Contributes to minimizing the environmental footprint
- Silicone chemistry provides performance up to 90+ months
For new buildings or spot / full blast, PPG SigmaGlide 1290 should only be applied over PPG SigmaGlide 790. As a refresh coat, PPG SigmaGlide 1290 can be applied over itself, PPG SigmaGlide 990 or PPG SigmaGlide 890 in line with PPG's General Working Procedure.
Stir base well before use for 5 minutes. Add hardener and stir well again for at least 5 minutes. Apply using airless spray. Use a roller and brush for small areas only.
|Stock Colours:||RAL 3011|
|VOC Content:||132 g/L|
|Suitable Substrates:||For anti fouling as part of a system|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||4.8 m2 per litre at 180 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||180 microns|
|Pot Life:||4 hours at 20°C|
|Touch Dry:||2 hours at 20°C|
|Overcoatable:||After 3 hours at 20°C|
|Refloating Time:||20 hours at 20°C|
|Cleaner / Thinner:||PPG Thinner 21-06|
|Shelf Life:||36 months in original unopened containers.|
|Packaging:||Available in 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.