PPG Nu-Klad SL is a three component, solvent free, self levelling epoxy floor coating suitable for industrial areas with heavy traffic on to concrete.
PPG Nu-Klad SL is best suited for infrastructure or industrial areas with heavy traffic as it has excellent resistance against hot tires and abrasion. Suitable for use with anti skid.
- Self levelling
- Suitable for industrial areas with heavy traffic
- Excellent abrasion resistance
- Excellent resistance against hot tires
- Suitable for use with anti skid
If applying to primed concrete the primer must be dry and free from contamination. For coated concrete that are sound ensure the substrate is sufficiently roughened, dry and cleaned. To ensure compatibility, rub the existing coating with a cloth with Xylene or MEK for 10 seconds and remove existing coatings if dissolving occurs.
|Type:||Solvent Free Self Leveling Epoxy|
|Stock Colours:||Depends on demand|
|Tintable:||Yes. Contact us to check shades. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||0.0g per Litre|
|Suitable Substrates:||For concrete|
|Application Method:||Trowel, Swedish Knife|
|Theoretical Coverage:||Approx 3.3 Kg per m2 for 2000 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||2000 microns|
|Pot Life:||25 minutes at 20°C|
|Touch Dry:||24 hours at 20°C|
|Overcoatable:||Between 24 hours and 7 days at 20°C|
|Fully Cured:||7 days at 20°C|
|Cleaner / Thinner:||Do not thin. Clean up with PPG Thinner 90-53|
|Shelf Life:||Base and Hardener 12 months, Filler 36 months when stored cool and dry|
|Packaging:||Available in 25 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.