£7.75 delivery on orders excluding certain products & postcodes *
PPG Nu-Klad IMP
SKU
ID19519
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: II)
A two-component, solvent-free industrial, impregnating epoxy floor primer.
Available in Clear 10 Litres
£217.13
£180.94
In stock
Product Description
PPG Nu-Klad IMP is a two-component, solvent-free, impregnating epoxy floor primer. Part of the PPG Nu-Klad floor coating system.
Best Uses
PPG Nu-Klad Imp has been developed to offer excellent penetration and saturation properties when applied to a concrete floor slab. Nu-Klad Imp is a two component solvent free, impregnating epoxy semi-transparent, grey floor primer.
- Primer for Nu-Klad floor coating systems
- Excellent impregnating properties (penetration and saturation of the concrete).
Application
PPG Nu-Klad IMP is applied by a roller and provides a semi-gloss finish. Nu-Klad Imp should be applied to floors that have been allowed to dry for at least 28 days in good ventilation conditions and the moisture content of the floor slab should not exceed 4.5%. The concrete must be sound, dry, free from laitance and any contamination, rough surface should be abraded by power tool or diamond abrading tool. The dry film thickness and spreading rate are dependent on the absorption capability coming from the roughness and porosity of the concrete.
Technical Details
| Components: | Two Part |
| Type: | Solvent Free Impregnating Epoxy |
| Finish: | Semi Gloss |
| Stock Colours: | Semi transparent grey |
| Tintable: | No |
| VOC Content: | 0.0g per Litre |
| Volume Solids: | 100% |
| Suitable Substrates: | For concrete floors |
| Application Method: | Brush, Roller, Trowel |
| Theoretical Coverage: | |
| Wet Film Thickness (WFT): | Depends on spreading rate and porosity of the substrate |
| Dry Film Thickness (DFT): | 50 microns |
| Induction Time: | None |
| Pot Life: | 40 minutes at 20°C |
| Dry To Walk On: | 16 hours at 20°C |
| Overcoatable: | Between 16 hours to 7 days at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Do not thin. Clean up with PPG Thinner 90-53 |
| Shelf Life: | Base and Hardener 12 months when stored cool and dry |
| Packaging: | Available in 10 Litres |
