PPG Sigma Rapid Dry Floor Paint is a one component floor coating based on urethane modified alkyd that works to dry extremely quickly allowing for minimised downtime that will save time and money.
PPG Sigma Rapid Dry Floor Paint is available in red and grey with a high gloss finish and provides a highly durable coating for use on interior flooring or decking. Once applied the finishing product is hard wearing and provides abrasion and impact resistance wherever used.
PPG Sigma Rapid Dry Floor Paint can be applied using brush, roller or spray to produce a high glossy finish that works to offer resistance with a finish that looks good on the eye. This high quality floor coating has a theoretical coverage rate of 13-14m2 per litre and is touch dry after just 1 hour at 20°C. Warmer conditions will significantly improve the drying time.
Surface and Environment
PPG Sigma Rapid Dry Floor Paint is designed for use on concrete and steel floors and can be used on any internal floor that has been suitably prepared to provide a highly decorative coating.
- Very fast drying
- Particularly suitable for interior floors and decks
- Minimum substrate temperature 5°C.
|Type:||Urethane Modified Alkyd|
|Stock Colours:||Red, Grey|
|VOC Content:||max 450 g/l|
|Volume Solids:||47 +/- 2%|
|Suitable Substrates:||Concrete floors at least 28 days old, primed steel or sound aged coatings|
|Application Method:||Brush or Roller|
|Theoretical Coverage:||13.4 m2/l|
|Wet Film Thickness (WFT):||-|
|Dry Film Thickness (DFT):||35 microns|
|Touch Dry:||60 minutes at 20°C|
|Overcoatable:||After minimum 6 hours at 20°C|
|Cleaner / Thinner:||PPG Thinner 20-05 (volume 0-2%)|
|Shelf Life:||At least 12 months if stored correctly|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.