PPG SigmaCover 400 (Amerlock) is a two component high solids epoxy coating suitable for garage floors, walkways and other concrete and metal substrates. London Underground Approved - LuL APR No.1255
PPG SigmaCover 400 (Amerlock) is a high performance, two-pack epoxy paint coating which is suitable for concrete and metal floors as well metal pipes and structural steel. Formerly known as SigmaCover 640, SigmaCover 400 is a self-priming, universal epoxy paint which has good adhesion on most coatings. SigmaCover 400 is available in a choice of BS and RAL colours, with a semi-gloss finish.
PPG SigmaCover (Amerlock) 400 has been specifically manufactured as a professional coating. With its unique formula, it is highly suitable for use on bridges, tank exteriors, containers and oil tanks. It has also achieved London Underground approval. Additionally, PPG SigmaCover 400 is ideal for chemical acid and fuel bunds.
When applying to carbon steel, blast clean substrate to Sa2.5. When being used for immersion also blast clean to Sa2.5. For concrete and masonry, remove grease, oil and other other contamination. For galvanized steel, remove all oil and contaminations with a suitable detergent or cleaner. Lightly abrasive blast to 40 - 75 microns. For ferrous metals and stainless steel, remove all rust, dirt grease and moisture. Lightly blast clean to a profile of 40 - 100 microns.
Ensure substrate temperature is kept within 5 and 50°C. Mix both components prior to combining. Mix hardener within base container by mechanical means. Can be thinned between 0 - 10% with suitable PPG thinners, especially during cold conditions such as garage floors during winter. Porous substrates such as screeded floors or tampered concrete floors can often use far more epoxy floor paint from our experience we estimate a coverage rate of approximately 3m2 per litre per coat.
PPG SigmaCover 400 should be applied by spray, brush or roller.
Surface and Environment
PPG SigmaCover 400 can be used in commercial, construction and industrial environments where chemical spillages, splashes and fumes from acids, alkalis, solvents and water can cause damage to the surface. PPG SigmaCover 400 works by protecting steel and concrete substrates from these examples of chemical and atmospheric attack. Because of it's high resistance to weathering, SigmaCover 400 is perfect for application to exterior bund linings, including, chemical, fuel or specially selected acid bunds. PPG SigmaCover 400 can be applied over mechanically cleaned steel and is also suitable for use on concrete or prepared damp surfaces.
- London Underground LUL 1255 approved
- Formerly Amerlock 400C and Croda Mebopro by Ameron
- High performance coating
- Resistant to acids, alkalis, solvents and fresh and salt water spillage/splashes
- Formerly SigmaCover 640
- Suitable for bund linings
- For surfaces such as concrete we calculate approx. 6m2 per litre
- Can be thinned between 0 - 10% with suitable PPG thinners, especially during cold conditions such as garage floors during winter. Porous substrates such as screeded floors or tampered concrete floors can often use far more epoxy floor paint from our experience we estimate a coverage rate of approximately 3m2 per litre per coat.
|Stock Colours:||White, Black, MIO|
|Tintable:||Yes, upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||180.0g per Litre|
|Suitable Substrates:||For carbon steel, concrete, masonry, galvanized steel, non ferrous metals, stainless steel, aged coatings and repairs|
|Application Method:||Brush, Roller or Airless Spray|
|Theoretical Coverage:||8.5 m2 per litre at 100 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||100 - 200 microns|
|Pot Life:||2 hours at 20°C|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 16 hours at 20°C. See overcoating tables on datasheet|
|Cleaner / Thinner:||Thin with PPG Thinner 91-92. PPG Thinner 21-06, PPG Thinner 21-25|
|Shelf Life:||At least 36 months when stored cool and dry|
|Packaging:||Available in 4 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.