PPG PhenGuard 965

SKU
id16847
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469 (Class: 3.8, Pk Grp: III)
A two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.
Available in 20 Litres
From £810.86 £675.72
In stock
Only %1 left
Product Description

PPG PhenGuard 965 is a two component, high build, amine adduct-cured novolac phenolic epoxy coating for offshore, marine and chemical / petrochemical sectors.

Best Uses

PPG PhenGuard is formulated as a chemical resistant tank lining. For detailed information on resistance and resistance notes please contact us.

  • Excellent resistance to a wide range of organic acids, alcohols, fats (regardless of free fatty acid content) and solvents
  • Maximum cargo flexibility
  • Low cargo absorption
  • Easy to clean
  • Good resistance to hot water
  • Can be applied and cures at temperatures down to 5°C (41°F)
  • Good application properties, resulting in a smooth surface

Application

Steel should be blast cleaned in situ to at least ISO 2 1/2 with a blasting profile of between 50-100 microns. Steel must be free from rust, scale, shop primer and any other contamination. Please allow for tins induction time of 10 minutes at 15°C.

Minimum curing time of PhenGuard 965 system before transport of cargoes is 3 months according to data sheet.  For transport of methanol and vinyl acetate monomer, a hot cure is required which cannot be substituted by a service period of 3 months with non-aggressive cargoes. Adequate ventilation must be maintained during application and curing. When used as a primer under solvent free tank linings, the DFT must be limited to a maximum of 100 microns (4 mils).

Technical Details

Systems

PPG PhenGuard 965 is used within the following Sika systems:

  • PPG 3329 System - PhenGuard 965 Tank Coating System

See Data Sheets tab for System sheet downloadable PDF.

Technical Info

Type: Solvent Based
Finish: Eggshell
Stock Colours: Off White, Pink, Grey
Tintable: No
VOC Content: 329.0 g/l
Volume Solids: 68%
Suitable Substrates: Steel
Application Method: Air or Airless Spray
Theoretical Coverage:

6.8m2 per litre for 100 microns

5.4m2 per litre for 125 microns

Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 500 - 1500μm
Pot Life: 2 hours at 20°C
Touch Dry: 18 hours at 1500 microns at 20°C
Recoatable: 8 hours - 14 days at 20°C
Full Cure 3 days at 20°C
Cleaner / Thinner: Clean with PPG Thinner 91-92
Shelf Life: At least 12 months when stored cool and dry
Packaging: 20 Litres

Related Products