£7.75 delivery on orders excluding certain products & postcodes *
PPG Sigma Vikote 63 can be used for protecting void spaces, cofferdams, steelwork and behind linings and pipes and offers high durability and flexibility in producing a flat black finish.
PPG Sigma Vikote 63 can be applied using air or airless spray and a brush or roller may be used only for the purpose of touching up and spot marking. Sigma Vikote 63 is touch dry after 8 hours at a temperature of 5°C and drying time will be significantly improved by warmer conditions.
PPG Sigma Vikote 63 produces a high quality black bituminous coating that can be used in various different environments, primarily on steel or blasted steel.
This product is a coating for the following systems:
Components: | One Part |
Type: | Bitumous Coating |
Finish: | Flat |
Stock Colours: | Black |
Tintable: | No |
VOC Content: | 365.0g per Litre |
Volume Solids: | 57% |
Suitable Substrates: | For steel, concrete and fibre cement |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 2.3m2 per litre at 230 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 250 - 500 microns |
Induction Time: | - |
Pot Life: | - |
Touch Dry: | 6 hours at 20°C |
Overcoatable: | After 8 hours at 20°C |
Fully Cured: | |
Cleaner / Thinner: | PPG Thinner 20-05 |
Shelf Life: | At least 24 months when stored cool and dry |
Packaging: | Available in 5 and 20 Litres |