PPG SigmaDur ClearCoat

SKU
id19591
Part A and B: UN1263 (Class: 3, Pk Grp: III)
A two-component, tough and abrasion resistant aliphatic clear acrylic polyurethane gloss finish.
Available in 4 Litres in Clear
£70.15 £58.46
In stock
Product Description

PPG Sigmadur Clearcoat is a two-component, aliphatic clear acrylic polyurethane gloss finish, suitable for application over aluminium pigmented polyurethanes.

Best Uses

PPG Sigmadur Clearcoat has been formulated to offer a tough and abrasion resistant finish with excellent gloss retention. Sigmadur Clearcoat is resistant to splash of mineral and vegetable oils, white spirit, paraffins, aliphatic petroleum products and mild chemicals and benefits from reduced sensitivity to early condensation and rain.

  • Excellent gloss retention
  • Tough and abrasion resistant
  • Resistant to splash of mineral and vegetable oils, white spirit, paraffins, aliphatic petroleum products and mild chemicals
  • Reduced sensitivity to early condensation and rain
  • Can be recoated even after long atmospheric exposure
  • Cures at temperatures down to -5°C
  • Suitable for use on stainless, non ferrous materials not subject to immersion

Application

PPG Sigmadur Clearcoat can be recoated even after long atmospheric exposure and cures at temperatures as low as-5°C (23°F). Sigmadur Clearcoat is suitable for application over aluminium pigmented polyurethanes and onto stainless steel, non-ferrous materials not subject to immersion.

Technical Details

Features

  • Suitable for application over aluminum pigmented polyurethanes
  • Excellent gloss retention
  • Tough and abrasion resistant
  • Resistant to splash of mineral and vegetable oils, white spirit, paraffins, aliphatic petroleum products and mild chemicals 
  • Reduced sensitivity to early condensation and rain  
  • Can be recoated even after long atmospheric exposure
  • Cures at temperatures down to -5°C (23°F)

Technical Info

Components: Two Part
Type: Aliphatic Polyurethane
Finish: Gloss
Stock Colours: Clear
Tintable: No
VOC Content: 450.0g per Litre
Volume Solids: 50%
Suitable Substrates: For stainless steel, non ferrous materials not subject to immersion
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 14.3 m2 per litre at 35 microns
Wet Film Thickness (WFT):
Dry Film Thickness (DFT): 35 - 50 microns
Induction Time: -
Pot Life: 4 hours at 20°C
Touch Dry: 1 hour at 20°C
Overcoatable: After 12 hours at 20°C
Fully Cured: 7 days at 20°C
Cleaner / Thinner: PPG Thinner 21-06
Shelf Life: Base: At least 36 months, Hardener: At least 24 months when stored cool and dry
Packaging: Available in 4 Litres

The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.

Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.

Recommended products to use