PPG Sigma SigmaDur One is a Marine high-gloss, quick drying, one component maintenance paint. It is very easy to apply, by brush or roller, on topsides, decks and superstructures. This product has an excellent adhesion level, even on aged alkyd, epoxy and polyurethane coatings. A high glossy, professional result is easily obtained through the use of this product.
PPG Sigma SigmaDur One is available in various colours, including White, and is intended for the maintenance of Marine appearances, both internally and externally. The quick-drying element of this product is especially important when considering maintenance on-board. This product works well with previous coats, has UV protection, as well as having an excellent colour and gloss retention, in order to keep the paintwork looking as optimal as possible, for as long as possible.
PPG Sigma SigmaDur One is easily applied using either a brush or roller. The product will be dry to the touch after 1 hour (at 20°C., and 3 hours at 15°C.), and will be completely dry in 8-12 hours dependent on the temperature. Sigma SigmaDur One is available in a wide variety of colours, in 5 litre of 20 litre packs, with a theoretical coverage rate of 14.3m2, per litre, for 35 m.
PPG Sigma SigmaDur One is for use on both internal and external surfaces on ships, for both maintenance and the improvement of aesthetics. This product has excellent flowing and levelling properties, making the process of application even simpler. It also works well with previous coatings, adhering with ease when this surface is prepared correctly. This should be done by ensuring the surface is dry, clean, free from any contamination, and sufficiently roughened - if this is necessary.
|Tintable:||Yes, certain colours upon request. Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||400.0g per Litre|
|Suitable Substrates:||For marine topsides, decks and superstructures|
|Application Method:||Brush, Roller|
|Theoretical Coverage:||14.3 m2 per litre at 35 microns|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||35 - 70 microns|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 8 hours at 20°C|
|Fully Cured:||4 days at 20°C|
|Cleaner / Thinner:||Supplied ready to use|
|Shelf Life:||At least 24 months when stored cool and dry|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.