£7.75 delivery on orders excluding certain products & postcodes *
SigmaGuard 750 can be used as a tank coating or as a system primer, part of various paint systems based on unsaponifiable binders.
PPG SigmaGuard 750 is best used to provide corrosion protection to tanks that are exposed to adverse weather conditions on a daily basis. SigmaGuard 750 can withstand extreme temperatures of up to -90°C right up to 400°C, providing the atmospheric conditions are normal. Resistant to jet fuel and kerosene.
PPG SigmaGuard 750 can be applied easily using air or airless spray once the two components have been mixed together following careful instructions. SigmaGuard 750 is extremely fast drying and provides users with a touch dry finish after just 30 minutes at 20°C. SigmaGuard 750 has a theoretical coverage rate of 8.7m2 per litre, suitable for the coating of tanks.
PPG SigmaGuard 750 is designed to withstand tough weather conditions and extremely adverse temperatures on an exterior basis. This product offers a grey, flat finish, with a high level of abrasion and impact resistance.
Components: | Two Part |
Type: | Moisture Curing Zinc Rich Ethyl Silicate |
Finish: | Flat |
Stock Colours: | Grey |
Tintable: | No |
VOC Content: | 452.0g per Litre |
Volume Solids: | 65% |
Suitable Substrates: | For steel |
Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
Theoretical Coverage: | 8.7 m2 per litre at 75 microns |
Wet Film Thickness (WFT): | |
Dry Film Thickness (DFT): | 75 - 100 microns |
Induction Time: | - |
Pot Life: | 12 hours at 20°C |
Touch Dry: | 30 minutes at 20°C |
Overcoatable: | After 12 hours at 20°C |
Fully Cured: | 12 hours at 20°C |
Cleaner / Thinner: | PPG Thinner 90-53 |
Shelf Life: | Binger: 9 months, Pigment: 24 months when stored dry and cool |
Packaging: | Available in 20 Litres |