PPG Steelguard 801

SKU
ID12813
UN1263 (Class: 3, Pk Grp: II)
A single component thin film solvent borne intumescent coating for 90 minutes of protection of structural steelwork against cellulosic fires.
Available in 20 Litres in White Only
£417.24 £347.70
In stock
Product Description

PPG Steelguard 801 is a single component thin film solvent borne intumescent coating for 90 minutes of protection of structural steelwork against cellulosic fires.

Best Uses

PPG Steelguard 801 provides up to 90 minutes protection from cellulosic fires with the added benefit of being fast-drying, providing short handling times and is suitable for both off-site or on-site application. Suitable for C1 to C4 internal and external environments (ISO 12944); for dry internal (C1) environments no topcoat is required. Weather resistant up to 12 months without topcoat provided the coating has been applied in accordance with INFORMATION SHEET 1222 and is not subject to running or pooling water, high humidity or immersion conditions.

Application

Approved primer must be sound, dry and free from any contamination. Stir thoroughly until homogenous and free of lumps. Apply using airless spray or brush / roller for small areas such as touch up and repair.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Technical Details

Certificates & Approvals

  • Tested and assessed to EN 13381-8, BS 476-20/21 and Factory Mutual Class number 4970
  • CE marked product, ETA 14/0115
  • Assessed to ETAG 018-2 for all durability classifications

Technical Info

Components: Single Pack
Type: Solvent-borne
Finish: Matt
Stock Colours: White
Tintable: No
VOC Content: 217.0 g/l
Volume Solids: 75 +/- 3%
Suitable Substrates: Structural Steelwork
Application Method: Airless Spray. Brush/Roller should only be used for small areas (touch up and repair)
Theoretical Coverage: 1.07m2 per litre for 700 microns
Wet Film Thickness (WFT): -
Dry Film Thickness (DFT): 200 - 1000 microns (8.0 - 40.0 mils) per coat
Induction Time: -
Pot Life: -
Touch Dry: 20 minutes at 20°C
Overcoatable: After minimum 4 hours at 20°C
Fully Cured: -
Cleaner / Thinner: Thinner 21-06
Shelf Life: At least 18 months when stored cool and dry
Packaging: Available in 20 Litres