PPG Steelguard 802

SKU id21148 UN1263 (Class: 3, Pk Grp: III)
A single part, thin film, solvent borne intumescent coating for fire protection of circular and rectangular hollow section structural steel.
Available in 20 Litres in White Matt
£312.30 (£374.76 Inc VAT)

Product Description

PPG Steelguard 802 is a single part, thin film, solvent borne intumescent coating for fire protection of  circular and rectangular hollow section structural steel.

Best Uses

PPG Steelguard 802 has a unique formulation for the protection of hollow sections. This intumescent coating provides up to 90 minutes protection against cellulosic fires. With the ability to apply up to 1000 microns in a single coat, Steelguard 802 is suitable for C1 - C4 internal and external environments. For internal C1 environments application is possible without a topcoat.

  • Fast drying
  • Short handling times
  • Suitable for off site or on site application
  • Weather resistant up to 12 months without topcoat if applied correctly

Application

Ensure to contact Promain's specialist intumescent team for application information for your individual requirements.

IMPORTANT INTUMESCENT PRODUCT NOTE: Always contact Promain’s technical team prior to purchase to obtain a tailored project specification and the advice necessary. The information displayed on this website should only be used as a guide. Promain UK Limited will not be held liable for any resulting damage to property, human life or monetary costs incurred due to incorrect specification, preparation, application or maintenance that has occurred due to negligence by either the purchaser or applicator. This includes your failure to have contacted us to obtain the relevant advice/specification.

Recommended Products To Use


PPG Thinner 21-06

PPG Thinner 21-06

Suitable for Sigmacover 640/640LT.

£27.03 (£32.44 Inc VAT)