£7.75 delivery on orders excluding certain products & postcodes *
PPG SigmaGuard 720
SKU
ID3925
Part A: UN1263 (Class: 3, Pk Grp: III), Part B: UN3469, (Class: 3, Pk Grp: III)
A two component reinforced high solids polyamine adduct cured epoxy tank coating.
Available in 4 and 20 Litres
From
£50.40
£42.00
In stock
Only %1 left
Product Description
PPG SigmaGuard 720 is a two component reinforced high solids polyamide adduct cured epoxy coating designed for coating tanks in light green or white and when dry has a surface that can easily be cleaned and maintained.
Best Uses
PPG SigmaGuard 720 (Amercoat 90S) is best used for providing a highly protective and decorative protective coating to tanks. SigmaGuard 720 offers excellent resistance to a wide range of chemicals as well as weathering. This product is highly recommended and offers recognised corrosion control. Resistant to jet fuel.
Application
PPG SigmaGuard 720 is easy to apply at low temperatures but dries quicker in warmer conditions. Apply 720 using air or airless spray for easy application and a smooth finish that dries to touch after just 3 hours at 20°C
Surface and Environment
PPG SigmaGuard 720 is primarily a tank coating that can be applied to steel substrates and offers excellent corrosion resistance to prevent cargo users from expensive repairs.
Technical Details
Approvals
- Recognized corrosion control coating (Lloyd's register), see sheet 1886
- Resistant to jet fuel / aviation kerosene
Systems
PPG SigmaGuard 720 is used within the following PPG systems:
- PPG 3320 System - SigmaGuard 720 Tank Coating System
See Data Sheets tab for System sheet downloadable PDF.
Features
- A two component reinforced high solids polyamide adduct cured epoxy coating
- Tank coating with good chemical resistance against a wide range of chemicals
- Short curing periods
- Good low temperature curing
- Easy to clean
Technical Info
| Components: | Two Part |
| Type: | Solvent Based |
| Finish: | Gloss |
| Stock Colours: | Light Green, White |
| Tintable: | No |
| VOC Content: | 233.0g per Litre |
| Volume Solids: | 78% |
| Suitable Substrates: | For steel |
| Application Method: | Brush, Roller, Air Atomised Spray or Airless Spray |
| Theoretical Coverage: | 6.2 m2 per litre at 125 microns |
| Wet Film Thickness (WFT): | |
| Dry Film Thickness (DFT): | 125 - 160 microns |
| Induction Time: | 10 minutes at 20°C |
| Pot Life: | 1.5 hours at 20°C |
| Touch Dry: | 2 - 3 hours at 20°C |
| Overcoatable: | Between 8 hours and 14 days at 20°C |
| Fully Cured: | |
| Cleaner / Thinner: | PPG Thinner 90-53 |
| Shelf Life: | Base: 12 months, Hardener: 24 months when stored cool and dry |
| Packaging: | Available in 4 and 20 Litres |
Related Products
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
*Sherwin Williams Fast Clad ER Epoxy Tank Lining
This product is now discontinued. See Sika Sikagard 62 as a potential alternative.
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
PPG Thinner 90-53
A thinning substance specially formulated for use with various different PPG paints and coatings.
From
£42.30
£35.25
PPG SigmaGuard 603
A two component, solvent free, amine cured epoxy coating for use as a chemical resistant, surface tolerant tank lining.
From
£525.05
£437.54
Jotun Tankguard HB Classic Formerly Tankguard HB
A 2 part polyamine cured epoxy coating with good chemical resistance formulated for use as a primer, mid coat or finish coat.
From
£344.88
£287.40
Jotun Penguard Express B11
A fast drying, two pack zinc phosphate pigmented, high solids and high build paint. Highways Approved Item No. 111.
£229.13
£190.94
PPG Prep 88 Formerly Sigmarite 88
Formerly Sigmarite 88. Water based cleaner or removing dirt, oil, etc. from floors, metal, cladding etc.
£70.68
£58.90