PPG SigmaGuard CSF 585

SKU
ID3929
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: III)
WRAS Approved for drinking water. A two component solvent free amine cured epoxy coating.
Available in 4 and 20 Litres
From £138.30 £115.25
In stock
Only %1 left
Product Description

PPG SigmaGuard CSF 585 is a two component, solvent free, amine cured, epoxy coating designed for coating tanks, and has been approved by KIWA Holland for the coating of tanks containing drinking water.

Best Uses

PPG SigmaGuard CSF 585 offers improved visibility in confined spaces due to light colour and works to significantly reduce the risk of explosion and fire hazard. SigmaGuard CSF 585 is available in blue and white gloss finishes for a decorative element on top of the protective properties.

Application

PPG SigmaGuard CSF 585 can be applied using single feed airless spray equipment, and has a theoretical coverage rate of 3.3m2 per litre when applied using this method. SigmaGuard CSF 585 may also be applied using brush for touch ups and line markings. /once applied, the product will be touch dry after 5 hours ready for a second coating after a 24 hour period has elapsed.

Surface and Environment

PPG SigmaGuard CSF 585 is designed specifically for use on tanks, such as sectional Braithwaite tanks to provide a protective and decorative coating. SigmaGuard CSF 585 can be used on blasted steel to provide a glossy finish. If a holding primer is required to improve adhesion then SigmaGuard 215 can be used.

Technical Details

Approvals

  • WRAS approved coating
  • Approved for drinking water use by KIWA Hollard
  • Meets NSF/ANSI Standard 61 for potatable water
  • Norsok M-501 System 3A

Systems

PPG SigmaGuard CSF 585 is used within the following PPG systems:

  • PPG 3325 System - Systems For Potable Tanks

See Data Sheets tab for System sheet downloadable PDF.

Features

  • Tankcoating for drinking water.
  • Can be applied by single feed airless spray equipment
  • Reduced explosion risk and fire hazard
  • Good visibility in confined spaces due to light colour

Technical Info

Components: Two Part
Type: Solvent Free, Amine Cured
Finish: Gloss
Stock Colours: Blue and White
Tintable: No
VOC Content: 6.0g per Litre
Volume Solids: 100%
Suitable Substrates: For potable tanks - carbon steel or concrete
Application Method: Brush, Roller or Airless Spray
Theoretical Coverage: 3.3 m2 per litre at 300 microns
Wet Film Thickness (WFT):  
Dry Film Thickness (DFT): 250 - 400 microns
Induction Time: -
Pot Life: 90 minutes at 20°C
Touch Dry: 5 hours at 20°C
Overcoatable: Between 24 hours and 20 days at 20°C
Fully Cured: 12 days at 20°C
Cleaner / Thinner: Do not thin
Shelf Life: At least 24 months when stored cool and dry
Packaging: Available in 4 and 20 Litres

Related Products