Protectakote 2K Metal Primer is a 2 part etch primer suitable for achieving adhesion of polyurethane to all types of aluminium as well as all other metal types where adhesion is problematic. Also suitable for applications involving complete immersion in water.
Protectakote 2K Metal Primer is suitable primer for a number of applications including aluminium walkways and steps, hydraulic lifts, metal railings, stainless steel items, galvanized items, aluminium boats, glazed ceramic tiles, etc. As it is suitable for complete immersion into water, Protectakote 2K Metal Primer is also suitable for application inside metal tanks, pipes and fittings, etc.
Clean and degrease the metal thoroughly before application. If oxides are present, a light sanding may be necessary. Use P180-P250 grit sandpaper, removing sanding dust with a solvent wipe. Allow to dry thoroughly before application. Mix the pre-weighed packs together in a suitable container and when homogeneous commence application. If the packs are to be split into smaller quantities, refer to the product data sheet.
|Tintable:||Please note, bespoke tints are non refundable / exchangeable|
|VOC Content:||94.0g per Litre|
|Suitable Substrates:||For aluminium walkways and steps, metal railings, stainless steel items, galvanized items, aluminium boats, glazed ceramic tiles, inside metal tanks, pipes and fittings etc|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||Approximately 8-10 m2 per litre|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):||20 - 26 microns for 8-10 m2/litre respectively|
|Pot Life:||24 hours at 25°C|
|Touch Dry:||10 minutes at 25°C|
|Overcoatable:||after 30 minutes and before 24 hours at 25°C|
|Cleaner / Thinner:||Clean tools with compatible urethane compatible 2k thinners|
|Shelf Life:||12 months at 15 - 25°C|
|Packaging:||Available in 1.5 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.