Protecta-Kote Clear Primer

SKU
id10177
UN1263 (Class: 3.3, Pk Grp: III)
Provides an adhesive primer coating for smooth inorganic surfaces prior to the application of a polyurethane coating.
Available in 1 Litre
From £21.35 £17.79
In stock
Only %1 left
Product Description

Protecta-kote Clear Primer for use on marble, glazed tiles, some plastics, and aluminium before applying Protecta-Kote anti-slip paints.

Protecta-kote Clear Primer is a single pack adhesion primer suitable for smooth in-organic surfaces such as marble, glazed tiles, shower trays and prepared aluminium, prior to the application of Protecta-kote Anti Slip paint.

Best Uses

Protecta-kote Clear Primer has been developed to ensure excellent surface adhesion for surfaces that are smooth and have low adhesion properties. Protecta-kote Clear Primer should be used on in-organic surfaces, before the application of Protectakote anti-slip paint. It doesn't change the substrate's appearance but enables the application of clear protective or anti-slip coatings, such as Safekote, to surfaces such as ceramic tiles, marble and other smooth shiny surfaces.

Application

Contaminants, such as dust, dirt and oils should be removed and the Protecta-kote Clear Primer be applied by paintbrush, roller or spray. Please read the technical data sheets for full preparation and application methods.

Surface and Environment

Protecta-kote Clear Primer is ideal to be used for the preparation of inorganic surfaces such as marble, glazed tiles and aluminium prior to the application of a polyurethane coating.

IMPORTANT NOTICE: From 24th August 2023, adequate training is required before industrial or professional use of this product. Training can be accessed at: https://www.safeusediisocyanates.eu

Technical Details

Features

  • Easy application process
  • Non toxic
  • Will not etch or damage the surface 
  • Does not damage or change the surface appearance
  • Offers excellent adhesion where conventional primers will not work

Technical Info

Components: One Part
Type: Primer
Finish:
Stock Colours: Clear
Tintable: No
VOC Content: 400.0g per Litre
Volume Solids: 0%
Suitable Substrates: For
Application Method: Brush, Roller, Air Atomised Spray or Airless Spray
Theoretical Coverage: Minimum 10 m2 per litre
Wet Film Thickness (WFT):
Dry Film Thickness (DFT):
Induction Time: -
Pot Life: -
Touch Dry: < 20 minutes (at 25ºC and 50% relative humidity)
Overcoatable: 30 minutes (at 25ºC and 50% relative humidity)
Fully Cured:
Cleaner / Thinner: Not required
Shelf Life: 18 months
Packaging: Available in 1 and 5 Litres

Related Products