£7.75 delivery on orders excluding certain products & postcodes *
Betofix RM is best used in façade areas or for closing broken out areas, gravel pockets, pores, uneven surfaces, spacers and holes. It can also be used for filling of concrete surfaces. or as a mineral corrosion protection for reinforcement steel (in combination with Remmers Rust Inhibitor M, Art. No. 0919).
Requirements of the substrate - Load-bearing, clean and dust-free.
Preparation - De-rust the exposed steel surfaces to bright metal (SA 2 ½ ). Pre-wet the substrate to make it matt damp.
Corrosion protection: Apply the grout in two layers of at least 1 mm each covering the entire surface. Waiting time between the layers is approximately 30 minutes. Subsequent works are executed wet-on-wet.
Concrete replacement: If needed, apply a scratch coat with the product. On difficult to reach areas, apply the product slightly diluted as contact grout. Apply the desired thickness in one layer and smooth. After 15 - 30 minutes finish the surface as desired by felting, rubbing, smoothing or texturing.
Components: | Single Pack |
Type: | Fast repair mortar |
Finish: | - |
Stock Colours: | Grey |
Tintable: | No |
VOC Content: | - |
Volume Solids: | - |
Suitable Substrates: | Concrete |
Application Method: | Brush or Trowel |
Theoretical Coverage: | Approx. 1.2 kg/m²/mm thick layer |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Induction Time: | 20 minutes at 20°C |
Pot Life: | - |
Touch Dry: | hours at 20°C |
Overcoatable: | After 2-3 hours at 20°C |
Fully Cured: | After after 2 days at 20°C |
Cleaner / Thinner: | Clean tools with water |
Shelf Life: | 12 months unopened |
Packaging: | Available in 25 Kg bags |