Remmers Thinner V101 is suitable for thinning paints and equipment cleaning from Remmers.
Remmers Thinner V101 is best used for thinning epoxy products and for cleaning tools. Solvent-free, coldcured plastics can be thinned or brought to a better working consistency if necessary for priming or sealing work, by working in V 101 slowly.
Suitable as a thinner for Remmers Epoxy MT 100. very good solvent for uncured, cold-cured plastics such as Rofaplast BG and Rofaplast KB.
When cleaning tools and splashed material, uncured, coldcured plastics can be completely removed with V 101. When thinning, V 101 should be added slowly to the material to be thinned and stirred vigorously until the desired consistency has been achieved. In normal cases, 3-5% by weight V 101 is sufficient.
Free of Xylene. In spite of this, ensure adequate ventilation when using. Avoid open fire and skin contact.
|Suitable Substrates:||Uncured, cold-cured plastics and as a thinner for primimng or sealing work|
|Shelf Life:||2 years in closed original containers|
|Packaging:||Available in 1 Litre, 5 Litres & 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.