Remmers ACC H Epoxy PH Accelerator

SKU
id17467
UN2735 (Class: III, Pk Grp: III)
A solvent free, amine activation accelerator for Remmers Epoxy Flex PH Color and Remmers Epoxy ST 100.
Available in 0.5 Kg
From £21.78 £18.15
In stock
Only %1 left
Product Description

Remmers Epoxy PH Accelerator is a solvent free, amine activation accelerator for Remmers Epoxy Flex PH Color and Remmers Epoxy ST 100.

Best Uses

Through the addition of Remmers ACC H Epoxy PH Accelerator the drying times and curing rates of Epoxy PH Color and Epoxy ST 100 can be reduced.

Application

Depending on the case at hand, the substrate must be made pore-free by using a suitable primer or adhesion promoter. Please mind suitable protective equipment on the job (q.v. personal protective equipment). Remmers ACC H is added to the hardener components of Remmers Epoxy PH Color or Remmers Epoxy ST 100. Remmers Epoxy PH Color or Remmers Epoxy ST 100 are then mixed and worked according to the directions given for working.

The accelerated system can be worked unfilled or filled (up to a max. of 1:1 parts by weight with quartz aggregate). The maximum degree of filling for accelerated Epoxy PH Color / Epoxy ST 100 depends on the quantity of accelerator and the ambient temperature and can only be determined on site, e.g. on a trial area.

Technical Details

Systems

  • Remmers SS325 - Epoxy HB Color Coating Systems (DFT = 350 - 400µ)
  • Remmers SS330 - Epoxy Flex PH Systems (DFT = 350 - 400µ)
  • Remmers SS350PH+ - Epoxy Self Smoothing System with Performance Seal (DFT = 2-3mm)

See technical tab for downloadable System Sheets.

If Adding To Remmers Epoxy PH Colour

  • Adding 2% - Drying Time approx 7 hours at 20°C
  • Adding 4% - Drying Time less than 4 hours at 20°C

If Adding To Remmers Epoxy ST 100

  • Adding 2% - Drying Time approx 8 hours at 20°C
  • Adding 4% - Drying Time approx 4 hours at 20°C

Technical Info

Components: Single Pack
Type: Solvent Free
Density: 0.97 g/cm3
Stock Colours: Yellowish-transparent
Tintable: No
Odour: Sharp Amine
Volume Solids: -
Suitable Substrates: ACC H is added to the hardener components of Epoxy PH Color or Epoxy ST 100
Application Method: -
Theoretical Coverage: Up to 4% by weight in relation to Epoxy PH Color/Epoxy ST 100
Drying Times: See product data sheet for comparison of drying times
Shelf Life: At least 12 months in original, closed and unmixed containers
stored cool but frost-free
Packaging: Available in 0.5 Kg

Related Products