£7.75 delivery on orders excluding certain products & postcodes *
Remmers Impregnation Primer
SKU
id17659
UN1993 (Class: 3, Pk Grp: II)
Solvent based primer on a siloxane base with a hydrophobizing effect.
Available in 5 or 30 Litres
Out of stock
Only %1 left
Product Description
Remmers Impregnation Primer is distinguished by high alkali resistance, i.e. the substrate to be primed may show a pH value of up to 14 without negatively influencing the effect of the primer. Because of its low molecular structure in the packaged state, Remmers Impregnation Primer has very good penetration capacity.
Best Uses
The Impregnation primer is a hydro-phobizing, clear impregnation primer for porous, cementitious building materials. It is best used for mineral, sound substrates. However, please note it should not be used on synthetic resin or dispersion based old coatings (swelling, blistering) or on bonded heat insulation systems. The product cannot be mixed with water.
Application
The mineral substrates must be dry, load-bearing and free of soiling, infestation (alga, moss and lichen), cracks (> 0.2 mm) and substances with a separating effect. Apply with a brush, roller or flow coating procedure using low pressure spraying equipment. Object and ambient temperature should be at least +5 °C and max.+30 °C.
Technical Details
Notes
Personal protective equipment required when sprayed. Use respiratory equipment with a combination filter at least A/P2 (made by
e.g. Draeger). For suitable protective gloves, see Safety Data Sheet. Wear closed work clothes.
Technical Info
| Components: | Single Pack |
| Type: | Solvent Based |
| Finish: | Clear liquid appearance |
| Stock Colours: | - |
| Tintable: | No |
| Siloxane Content: | Approx. 3.5% by mass |
| Density | Approx. 0.8 g/cm³ |
| Suitable Substrates: | For Outdoor use on mineral sound substrates |
| Application Method: | Brush, Roller, or low pressure sprayer |
| Theoretical Coverage: | 0.2 - 0.4 litres/m² depending on the absorption capacity of the substrate |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | - |
| Working Temperature: | Min +5°C and max +30 °C |
| Pot Life: | - |
| Touch Dry: | - |
| Overcoatable: | - |
| Fully Cured: | - |
| Cleaner / Thinner: | Remmers V101 Thinner |
| Shelf Life: | 2 years in closed original containers |
| Packaging: | Available in 5 or 30 Litres |
Related Products
KEIM Soldalit Fixativ
A sol-silicate binding agent and dilution for use with the Keim Soldalit system.
From
£96.60
£80.50
RODO ProDec Single Arm Roller Cage PRFR005 - 9 Inch
9 Inch Single Arm Paint Roller Cage.
From
£8.08
£6.73
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Remmers Color PA Formerly Concrete Acrylic Betonacryl
A water based, CO2 inhibiting, water repellent protective coating for renovation and repair measures on concrete surfaces.
From
£76.74
£63.95
RODO All Purpose Paint and Varnish Paint Brush
A general contractor all purpose paint brush in various sizes.
From
£2.69
£2.24
RODO ProDec Roller Refills - 9 Inch x 1¾ Inch
Available in 4 different styles - Medium Pile, Short Pile, Short Pile Microfibre and Gloss Roller Refills.
From
£5.38
£4.48
Remmers Color LA
A true silicone resin exterior masonry paint with film preservative for surfaces at risk of infestation with algae or fungi.
From
£96.11
£80.09