£7.75 delivery on orders excluding certain products & postcodes *
The Impregnation primer is a hydro-phobizing, clear impregnation primer for porous, cementitious building materials. It is best used for mineral, sound substrates. However please note it should not be used on synthetic resin or dispersion based old coatings (swelling, blistering) or on bonded heat insulation systems. The product cannot be mixed with water.
The mineral substrates must be dry, load-bearing and free of soiling, infestation (alga, moss and lichen), cracks (> 0.2 mm) and substances with a separating effect. Apply with a brush, roller or flow coating procedure using low pressure spraying equipment. Object and ambient temperature should be at least +5 °C and max.+30 °C.
Personal protective equipment required when sprayed. Use respiratory equipment with a combination filter at least A/P2 (made by
e.g. Draeger). For suitable protective gloves, see Safety Data Sheet. Wear closed work clothes.
Components: | Single Pack |
Type: | Solvent Based |
Finish: | Clear liquid appearance |
Stock Colours: | - |
Tintable: | No |
Siloxane Content: | Approx. 3.5% by mass |
Density | Approx. 0.8 g/cm³ |
Suitable Substrates: | For Outdoor use on mineral sound substrates |
Application Method: | Brush, Roller, or low pressure sprayer |
Theoretical Coverage: | 0.2 - 0.4 litres/m² depending on the absorption capacity of the substrate |
Wet Film Thickness (WFT): | - |
Dry Film Thickness (DFT): | - |
Working Temperature: | Min +5°C and max +30 °C |
Pot Life: | - |
Touch Dry: | - |
Overcoatable: | - |
Fully Cured: | - |
Cleaner / Thinner: | Remmers V101 Thinner |
Shelf Life: | 2 years in closed original containers |
Packaging: | Available in 5 Litres |
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.