Rustoleum 3333 Super Adhesive Primer

SKU
id2660
Part A: UN3082 (Class: 9, Pk Grp: III), Part B: UN3066 (Class: 8, Pk Grp: III)
A super adhesive, two pack, water based epoxy primer. For very smooth, hard to adhere substrates such as tiles.
Available in 1 and 5 Litres
From £37.06 £30.88
In stock
Only %1 left
Product Description

Rustoleum Mathys 3333 Super Adhesive Primer is a water based 2 pack epoxy super adhesive primer. Suitable for use on all smooth closed substrates.

Best Uses

Rustoleum Mathys 3333 Super Adhesive Primer is best used on power floated concrete floors, ceramic tiles, glass, stainless steel and all smooth surfaces. Rustoleum 3333 is an ideal Primer for resistance to moderate abrasion, intermittent high humidity and moisture, regular chemical cleaning and spillage of chemicals, when recoated with the appropriate Rustoleum System.

Rustoleum 3333 is perfect for creating an excellent bond without blasting or etching and can be over coated with virtually any other paint or coating.

  • Water-based epoxy, super adhesive
  • Suitable for power floated concrete floors, ceramic tiles, glass, stainless steel, and all smooth surfaces
  • Perfect bond without blasting or etching
  • Can be over coated with virtually any other paint or coating
  • Ideal primer to overcoat tiled walls
  • Should be used on non-porous, dense mineral substrates
  • Use on tiles non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel and thermosetting
  • Plastics like fibreglass-reinforced polyester or epoxy
  • Perfect chemical bond without blasting or etching
  • Low material usage - A real cost saver
  • Can be recoated with virtually any other 2K paint
  • Water-based; low odour
  • Excellent flow

Application

Rustoleum Mathys 3333 Super Adhesive Primer can be applied using brush, roller or spray and is touch dry after 6 hours, assuming room temperature is 20°C. Any warmer and drying time will decrease. Make sure you stir the product well before use and ensure the surface is clean, dry and free from any debris or contaminants.

Surface/Environment

Rustoleum Mathys 3333 Super Adhesive Primer is designed for use on all smooth surfaces including, power floated concrete floors, ceramic tiles, glass, stainless steel, aluminium, fibreglass and reinforced polyester or epoxy. 3333 can be used internally or externally, in some cases, but we would recommend using indoors to achieve a longer lasting life.

Technical Details

Notes

  • When mixing mix with electric mixer for minimum of 5 min.
  • Apply by mohair roller 
  • Apply in a very thin layer not more than 25 μm wet (15 μm dry)
  • Dilute up to 10 % vol. with water. Use brushes based on a mixture of synthetic/natural bristles. Check wet film thickness, avoid excessive film thickness

Technical Info

Components: Two Part
Type: Water Based
Finish: Satin
Stock Colours: White Greyish
Tintable: No
VOC Content: 8.0g per Litre
Volume Solids: 61.9%
Suitable Substrates: For non-porous, dense mineral substrates like tiles or power floated concrete; non-ferrous metals like stainless steel, aluminium or new hot-dip galvanized steel and thermosetting plastics like fibreglass-reinforced polyester or epoxy
Application Method: Brush, Roller or Air Atomised Spray
Theoretical Coverage: 25 - 30m2 per litre at 15 microns DFT. To achieve the coverage rates stated for 3333 primer, you need to mix Part A & Part B together. Once mixed you need to fill the empty Part A container with water, and add this to the already mixed Parts A & B, and mix the whole lot together.
Wet Film Thickness (WFT): 25 microns
Dry Film Thickness (DFT): 15 microns
Induction Time: -
Pot Life: 2 hours at 20°C
Touch Dry: 6 hours at 20°C
Overcoatable: 16 hours at 20°C
Fully Cured: 8 days at 20°C
Cleaner / Thinner: Hot tap water and soap
Shelf Life: 3 years
Packaging: Available in 1 and 5 Litres

Related Products