Rustoleum 5130 Primer DSP damp surface primer is specially formulated to provide an ultra resistant surface that prevents vapour, pressure and moisture build up, dampness from the substrate.
Rustoleum 5130 Primer DSP damp surface primer is specially designed for damp surfaces and works by suppressing the water vapour pressure from the surface to prevent damages to floors and other surfaces. When applied, 5130 Primer produces a glossy, ivory finish to concrete and Asphalt Floors.
Rustoleum 5130 Primer DSP damp surface primer is a 2 component epoxy primer best used on concrete, asphalt balconies and suspended decking, to name a few. 5130 Primer DSP damp surface primer works to prevent air/moisture blistering and cracking on floors, to protect the surface and keep it looking appealing to the eye.
Rustoleum 5130 Primer DSP damp surface primer can be applied using brush or roller for easy application and a coverage rate of 4m2 per litre. Available in 2.5 litre packs, 5130 offers an overall coverage rate of 10m2 per tin and has an overall solids content of 96%. Mix the two components together and stir thoroughly using a mechanical device or a strong manual mixing device and apply imminently.
Surface and Environment
Rustoleum 5130 Primer DSP damp surface primer is specially designed to provide an ultra resistant surface that works to prevent vapour pressure, moisture build up and dampness from the substrate. Rustoleum 5130 Primer DSP damp surface primer works well in internally and externally on concrete and asphalt floors prone to dampness.
- Super high-solids 2-components
- Developed for suppression of vapour pressure effects to prevent air/moisture blistering on suspect concrete and asphalt balcony surfaces, suspended decking etc.
- Resistant to vapour pressure and damp from the substrate
- Recoatable with epoxy or polyurethane coatings
|Type:||Solvent based Epoxy Primer|
|VOC Content:||198.0g per Litre|
|Suitable Substrates:||For use on asphalt and concrete|
|Application Method:||Brush, Roller, Rake, Trowel|
|Theoretical Coverage:||4 m2 per litre|
|Wet Film Thickness (WFT):||250 microns|
|Dry Film Thickness (DFT):||240 microns|
|Pot Life:||30 mins at 20°C|
|Touch Dry:||6 hours at 20°C|
|Overcoatable:||After 16 hours, but within 48 hours at 20°C|
|Fully Cured:||2 days at 20°C|
|Cleaner / Thinner:||Rustoleum Thinner 160|
|Shelf Life:||3 years unopened|
|Packaging:||Available in 2.5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.