Rustoleum Epoxyshield Concrete Repair Mortar can be used internally or externally for the renovation of concrete floor slabs or walls, where holes, cracks and damage has occurred.
Rustoleum Epoxyshield Concrete Repair Mortar is a concrete repair product designed for concrete or power floated floors that can be used for rapid repairs to bolt holes, large cracks and crevices. Rustoleum Epoxyshield Epoxy Repair Mortars packaging can be used as a mixing container and the kit includes a free spreading spatula and mixing rod. Promain offers you a demonstrative video with this product to offer you guidance and give you a general idea of what this product does.
Rustoleum Epoxyshield Concrete Repair Mortar is best used for the repair and renovation of concrete when unsightly damage has occurred and has the potential to cause injuries to those who walk on or by the damages. Rustoleum Epoxyshield Concrete Repair Mortar is a powdered repair product on cement base and resins for inside and outside use. For levelling and repairing cracks, holes and other damages in concrete, cement renderings and not painted brickwork.
On bare substrate: clean with steel brush or sand blaster. The substrate must be solid and free from dust, oil and grease. Porous substrates must be moistened first. Metal parts are to be treated with an anti-rust primer (Combiprimer 3369/3380 or Hard Hat 2169/2182).
Apply at a temperature of min. 5°C. Mixing & Thinning: Mixing ratio: Approximately 5 parts of powder to 1 part of water (2 litres of water for the entire 10 KG). Fill the container with the water. Add the dry mortar to the water whilst stirring. Mix water and powder thoroughly to a thick smooth, lump-free substance. Add some water to your liking if the mortar is too dry. Application: Apply the product with the included trowel or spatula up to a maximum layer thickness of 2 cm. Wet the trowel to smooth out any trowel marks or irregularities. After 48 hours the surface can be sanded using a rough sandpaper (P120) to obtain a smooth end result.
Surface and Environment
Rustoleum Epoxyshield Concrete Repair Mortar can be used internally or externally for the renovation of concrete, where holes, cracks and damages have occurred. Use, Epoxyshield Epoxy Repair Mortar in a dry environment to ensure the best results. Once dry, it will work exactly like concrete and offer strong resistance to weathering, abrasion and impact.
- Epoxyshield Concrete Repair Mortar for bigger repairs there is now the ready-mix concrete repair mortar
- The ideal product for rapid repairs to holes, large cracks etc.
- Simply add water, mix and apply
- After 24 hours Epoxyshield Epoxy Repair Mortar will have hardened to a tough concrete base layer and it can then easily be sanded to a smooth final finish
- The packaging can be used as a mixing container and a spreading spatula and mixing rod are supplied free with the product
- For horizontal and vertical use
- Quick & easy concrete repair
- FREE trowel included.
|Type:||Powdered repair product on cement base and resins|
|Finish:||Sandable to a Smooth Finish|
|VOC Content:||0 g/l|
|Suitable Substrates:||Concrete and cement renderings|
|Application Method:||Trowel or spatula|
|Theoretical Coverage:||Use 10 kg for 0.4 m2 at 2 cm thickness|
|Wet Film Thickness (WFT):||2 cm (cons.: 25 kg/m²)|
|Dry Film Thickness (DFT):||2 cm (cons.: 25 kg/m²). Maximum 0,4 m² per 10 kg (film thickness 2 cm).|
|Touch Dry:||24 hours at 20°C|
|Overcoatable:||After 2 days at 20°C|
|Fully Cured:||1 month at 20°C|
|Cleaner / Thinner:||Clean equipment or spills with water|
|Shelf Life:||1 year from date of production in unopened cans|
|Packaging:||Available in 10 Kg|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.