£7.75 delivery on orders excluding certain products & postcodes *
*Rustoleum B95 SL Self-Levelling Epoxy System
SKU
ID3579
***
This product is now discontinued.
In stock
Product Description
Please note, this product is now discontinued. Contact our technical team for a suitable alternative.
Rustoleum-Mathys B95 SL Self-Levelling Epoxy System is an epoxy mortar to repair and level flooring, designed for use on concrete or power floated floors.
Rustoleum-Mathys B95 offers excellent chemical and wear resistance, suitable for use in light industrial exposures.
Best Uses
Rustoleum-Mathys B95 SL Self-Levelling Epoxy System is a durable product, brought to you at competitive prices, used for self levelling uneven concrete and asphalt-concrete floors.
Application
Rustoleum-Mathys B95 SL Self-Levelling Epoxy System is available in 5 litre and 20 litre tub sand can be applied directly to damp surfaces, although a dry substrate is preferred. Rustoleum-Mathys B95 offers users a theoretical coverage rate of 2m2 per litre and is available in most RAL pastel colours.
Surface and Environment
Rustoleum-Mathys B95 SL Self-Levelling Epoxy System is specially designed for use in light industrial environments for levelling out uneven floors to produce a smooth, flat finish. Rustoleum-Mathys B95 can be used on concrete and asphalt concrete floors to offer excellent protection as well as decoration in some cases.
Technical Details
Features
- Self-levelling epoxy system for horizontal concrete floors or asphalt-concrete floors
- Very low solvent content
- Applied directly to damp surfaces
- Good chemical and wear resistance
- Low odour during application
Technical Info
| Components: | Two Pack |
| Type: | Solvent Based |
| Finish: | Gloss |
| Stock Colours: | Off White |
| Tintable: | Yes, to most RAL or British Standard codes. Please note, bespoke tints are non refundable / exchangeable |
| VOC Content: | 31 g/L |
| Volume Solids: | 96% |
| Suitable Substrates: | For concrete floors etc. |
| Application Method: | Rake and Trowel |
| Theoretical Coverage: | 2 m2 per litre |
| Wet Film Thickness (WFT): | 500 microns |
| Dry Film Thickness (DFT): | 500 microns |
| Induction Time: | 10 minutes for a 20 litre. mix at 20°C |
| Pot Life: | 45 minutes for a 20 litre. mix at 20°C |
| Touch Dry: | 16 hours at 20°C |
| Overcoatable: | After 24 hours at 20°C |
| Fully Cured: | 7 days at 20°C |
| Cleaner / Thinner: | Use Rust-Oleum Thinner 160 |
| Shelf Life: | 5 years from date of production in unopened cans, if stored in dry, well ventilated areas, not in direct sunlight at temperatures between 5° and 35°C |
| Packaging: | Available in 5 and 20 Litres |
Related Products
Mapei Planitop Smooth and Repair R4
A rapid-setting fibre-reinforced structural cementitious mortar, applied in a single layer from 3 to 40 mm thick, for repairing and smoothing concrete...
From
£40.43
£33.69
Rustoleum Thinner 160
Thinner for Rustoleum CombiColor CombiPrimer 3302 Adhesion Primer.
From
£24.10
£20.08
Rustoleum 5401 Impregnation Primer
Rustoleum-Mathys Impregnation Primer 5401 is a solvent free, two component epoxy primer for concrete floors.
From
£38.68
£32.23
Centrecoat Industrial Floor Paint Application Pack
Contains everything you need to professionally apply paint to floors - except the paint!
£108.12
£90.10
Rustoleum EpoxyShield Fine Crack Repair
For quick repair of fine crack and holes in warehouse, workshop and concrete floors.
From
£33.04
£27.53
Rustoleum Pegakote Floor Paint
A hard wearing two-component water based epoxy floor paint and wall paint for interior use.
From
£62.57
£52.14
RODO Paddle Mixer
Ideal for use as an attachment to a drill to enable the thorough mixing of paints and coatings.
From
£9.24
£7.70
Rustoleum Rust-O-Thane 9200
A water based tintable high UV resistance polyurethane topcoat, good colour retention, for concrete floors, Upvc, plastics and steel.
From
£31.27
£26.06