Rustoleum 5090 Anti-Condensation Wall Paint works to resists moisture build up resulting in condensation that can possibly lead to mould, mildew and fungal growth internally.
Use Rustoleum 5090 Anti-Condensation Wall Paint on walls and ceilings to provide a hygienic coating in a variety of different environments.
Rustoleum 5090 Anti-Condensation Wall Paint is best used to provide a durable finish that can be used on ceilings and the upper/lower parts of walls where moisture build up is a real concern. Rustoleum 5090 Anti-Condensation Wall Paint is a multi-purpose product available at great prices in 5 and 20 litre containers.
Rustoleum 5090 Anti-Condensation Wall Paint can be applied using brush or roller to provide surfaces with a white, water-based, flat finish. Rustoleum 5090 Anti-Condensation Wall Paint is ideally applied in 1 coat but can be applied with 2 or even 3 coats to create a textured finish. Rustoleum 5090 Anti-Condensation Wall Paint is touch dry after just 1 hour and can be recoated after 5 hours for a protective surface on all walls and ceilings.
Surface and Environment
Rustoleum 5090 Anti-Condensation Wall Paint is ideally suited for use in environments where steam or water vapour formation occurs, in order to prevent dripping and condensation build up. 5090 Anti-condensation Paint is specially designed for use on walls and ceilings in high humidity areas, such as breweries, wash and shower rooms and kitchens where steam from kettles and cookers can cause damage.
- Rustoleum-Mathys 5090 Anti-condensation mould resistant wall and ceiling paint
- Prevents dripping from condensation
- Use on or ceilings and the upper part of walls
- Rustoleum-Mathys 5090 provides a durable finish
- Rustoleum-Mathys 5090 can be applied on slightly damp surfaces
- Ideal for high humidity areas (breweries, wash and shower rooms, etc.)
|Type:||Water-based single pack hygienic topcoat|
|Stock Colours:||RAL 9010 White|
|VOC Content:||57 g/l|
|Suitable Substrates:||Ceilings and the upper parts of walls|
|Application Method:||Brush, Roller, or Airless Spray|
|Theoretical Coverage:||1.35 m² per litre|
|Wet Film Thickness (WFT):||740 microns|
|Dry Film Thickness (DFT):||200 microns|
|Touch Dry:||1 hour at 20°C|
|Overcoatable:||After 5 hours at 20°C|
|Fully Cured:||3 days at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||4 years unopened|
|Packaging:||Available in 5 and 20 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.