Please note this product has a 2 working day lead time to delivery.
Rustoleum Premium Cover Primer is a water based acrylic matt wall primer for interior and exterior use.
Rustoleum Premium Cover Primer is formulated as a primer on existing coats of wall paint, lightly powdering and absorbent mineral substrates. Suitable surfaces include: existing coats of paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. In the case of old layers of wallpaper, make sure that the wallpaper adheres adequately to the substrate. Old layers of vinyl wallpaper may contain plasticisers which slow paint drying.
Rustoleum Premium Cover Primer prevents variations in gloss, ensures better adhesion and hiding power, prevents absorption and improves coverage when applying the finishing coats. Solvent-free, low-odour and quick drying. For interior and exterior use.
The substrate must be capable of supporting the paint, completely set, clean, dry, and free from dust or grease. Sand and repair surface irregularities. Remove and/or repair all loose and unstable coats. In the case of exterior applications, remove all moss, mould and algal growth.
For new, untreated substrates
- Once dry, prime with Wall primer opaque
- Thoroughly clean lightly powdering surfaces
- Existing intact coats of wall paint
- Clean using Paint cleaner
For existing, non-load-bearing substrates
- Thoroughly remove loose coats
- Thoroughly wash powdery coats and allow them to dry
- Carry out any repairs
- Prime with Stabilising primer
For walls with contamination caused by nicotine, damp, rust or soot
- Clean thoroughly using Paint cleaner
- Treat surface/stain with Sealing primer
The systems described above apply for the most common types of surface. For specific applications and/or detailed advice, please contact our technical team.
|VOC Content:||10 g/L|
|Suitable Substrates:||Suitable surfaces include: existing coats of paint, cement and plasterwork, concrete, brick, gypsum panelling, board, etc. In the case of old layers of wallpaper, make sure that the wallpaper adheres adequately to the substrate. Old layers of vinyl wallpaper may contain plasticisers which slow paint drying.|
|Application Method:||Brush, Roller or Spray|
|Theoretical Coverage:||12 m2 per litre per coat|
|Wet Film Thickness (WFT):|
|Dry Film Thickness (DFT):|
|Touch Dry:||1 hours at 20°C|
|Overcoatable:||After 4 - 6 hours at 20°C|
|Cleaner / Thinner:||Water|
|Shelf Life:||Minimum of 12 months in the tightly sealed original packaging in a dry, cool and frost-free place.|
|Packaging:||Available in 4 and 10 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.