Please note, this product will shortly be discontinued by the manufacturer.
Rustoleum Cold Galvanizer 1085 is a fast drying, zinc rich primer based on an epoxy ester resin. Contains pure zinc as pigment and provides cathodic protection to metal to protect against rust.
Rustoleum Mathys Cold Galvaniser 1085 is ideally suited for use in industrial exposures where there is a need for protecting steel. Cold Galvaniser 1085 is part of Promain's extensive range of Rustoleum Metal Protection products that work well on all kinds of different metal substrates, including, storage tanks, guard rails, ducts and production wells.
- Offers long-lasting cathodic protection
- Contains 86.5% pure zinc
- Withstands continuous exposure to high temperatures of up to 300°C
- Touch dry after 15 minutes
- Ideal for touching-up galvanised steel, welding seems etc.
Remove grease, oil and all other surface contaminations by alkaline or high pressure (steam) cleaning in combination with appropriate detergents. For optimum results remove rust, rust scale, mill scale and deteriorated coatings by abrasive blasting to Sa 2½ (ISO 8501-1 : 1988), blast profile max. 50 μm. The surface must be clean and dry during application.
To ensure homogeneity, coating materials should be thoroughly stirred prior to use. To avoid settlement of the zinc pigments on the bottom of the can stir regularly during
Temperature of air, substrate and coating material between 5 and 35°C and relative humidity below 85%. The substrate temperature must be at least 3°C above dew point.
- Rustoleum 1085 offers maximum corrosion resistance through galvanic protection.
- Contains 86,5 wt.% pure zinc.
- 1085 Cold Galvanizer offers long-lasting cathodic protection.
- Ideal for touching up galvanized steel, welding seams, etc.
- Typical applications are Production welds, Ducts, Guard rails, Storage tanks,
- Also for use on Gutters, Trailers, Fences, Bridges, Utility towers, Piping.
|Type:||Zinc Rich Primer|
|VOC Content:||VOC Level: 440 g/l, VOC Limit: 500 g/l|
|Suitable Substrates:||New, bare steel, blasted steel or galvanized steel surfaces|
|Theoretical Coverage:||13 m²/l|
|Wet Film Thickness (WFT):||75 μm|
|Dry Film Thickness (DFT):||35 μm|
|Touch Dry:||15 minutes at 20°C|
|Dry To Handle:||2 hours at 20°C|
|Overcoatable:||After 4 hours at 20°C|
|Fully Cured:||3 days at 20°C|
|Cleaner / Thinner:||Up to 5 vol. %; RUST-OLEUM Thinner 160.|
|Shelf Life:||years from date of production unopened|
|Packaging:||Available in 5 Litres|
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.