£7.75 delivery on orders excluding certain products & postcodes *
Selemix 7-120 has been designed to provide excellent colour fastness with an extremely high gloss finish, when used in the Selemix system with the applicable primer the system will provide a coating with a high resistance to atmospheric attack in highly aggressive environments making is perfect for application on structural steel, light industrial equipment, machine tools, plant equipment, excavators, diggers, dumpers, metal shelving, bare ferrous steel, black steel, garage doors plus many more.
7-120 Acrylic UHS 2 pack Topcoat is best used in conjunction with Selemix primers 2K High Build anti-corrosive primer grey 0-440, 2K Epoxy primer beige 0-400, Epoxy primer 7-413, using 7-120 is combination with these primers will provide outstanding protection against atmospheric attack on galvanised steel, bare ferrous steel, black steel, Stainless steel, fibre glass reinforced polyester, old finishes, agricultural equipment, tractors, harvesters, trailers, structural steel, railings, plant equipment, diggers, excavators, screed pump, electrical cabins plus many more.
Selemix 7-120 can be applied by both conventional and airless spray equipment, for best results it is recommended 2 coats are applied. In order for the 7-120 topcoat to cure it will need to mixed with Selemix Hardener 9-120 at general ratio of 4 to 1 and thinned down with Selemix Thinner 1-430, always consult the Technical Data sheet for applicable mix ratio.
Components: | Two Pack |
Type: | Acrylic Topcoat |
Finish: | High Gloss |
Stock Colours: | 00-A-01 & 00-A-05 |
Tintable: | Yes. Please note, bespoke tints are non refundable / exchangeable |
VOC Content: | 404-421 g/L |
Volume Solids: | 53-55 % |
Suitable Substrates: | Steel structures, agricultural and plant equipment |
Application Method: | Conventional Spray, Electrostatic Spray |
Theoretical Coverage: | 10-11 m2/L at 50µm DFT |
Wet Film Thickness (WFT): | 90-100µm |
Dry Film Thickness (DFT): | 50µm |
Induction Time: | - |
Pot Life: | 2 hours at 20°C |
Touch Dry: | 1-2 hours at 20°C |
Overcoatable: | Once hard dry - maximum 24 hours without sanding |
Hard Dry: | 24 hours at 20°C |
Cleaner / Thinner: | |
Shelf Life: | See tin for shelf life and storage information |
Packaging: | Available in 3 and 12 Litres |