£7.75 delivery on orders excluding certain products & postcodes *
Selemix 4-040x 2 Pack High Build Epoxy Primer
SKU
ID14000
UN1263 (Class: 3, Pk Grp: II)
An easy to apply, high filling primer with excellent anti corrosive properties, ideal for protecting ferrous steel from the elements.
Available in 15.7 Litres. Available in Light Beige and Grey (Grey Close To RAL 7035)
From
£394.10
£328.42
In stock
Only %1 left
Product Description
Please note, the Hardener is not included with this product.
Selemix Epoxy Primer 4-040x is a 2K high build epoxy primer suitable for conventional application and gives outstanding performance with high pressure spray equipment (airmix/airless).
Please note, the Hardener is not included with this product.
Best Uses
Robust application characteristics and good anti-corrosion properties make 2.704.040X ideal for wide industrial use. It is available in: 2.704.0400 Beige and 2.704.0401 Light Grey (close to RAL 7035). Ideal for application to steel, blasted steel, iron phosphated steel.
- Ancillary flexibility
- Sag resistant
- Low solvent emissions
- ISO12944 C4-M approved
Selemix 2.704.0440 is able to withstand temperatures up to 300°C - please call our technical team on 01462 421333 to discuss if this product is suitable for your circumstances.
Application
Degrease thoroughly before painting. Do not use over wash primers or synthetic primers. Primer 2.704.040X should be mixed depending on application with Hardener 1.959.4020. This primer requires 2 coats.
Technical Details
Approvals and Certifications
- ISO12944 C4-M approved
Technical Info
| Components: | Two Components |
| Type: | High Build Epoxy Primer |
| Finish: | - |
| Stock Colours: | Light Beige (2.704.0440) and Grey (2.704.0401/E25K) |
| Tintable: | No |
| VOC Content: | 420-500 g/lt |
| Volume Solids: | 52% as supplied |
| Suitable Substrates: | Steel, zinc plated steel and aluminium |
| Application Method: | Conventional Spray, Airmix Spray, Electrostatic Spray |
| Theoretical Coverage: | 4.2 – 5.1 m2/l |
| Wet Film Thickness (WFT): | - |
| Dry Film Thickness (DFT): | 70-100µm |
| Induction Time: | - |
| Pot Life: | 3-4 hours at 20°C |
| Dust Dry: | 10-15 minutes at 20°C |
| Touch Dry: | 4 hours at 20°C |
| Hard Dry: | 8-10 hours at 20°C |
| Overcoatable: | In 60 minutes with any 2k Selemix topcoat |
| Cleaner / Thinner: |
1-410 Medium Epoxy Thinner 1-400 Slow Epoxy Thinner |
| Shelf Life: | See tin |
| Packaging: | Available in 15.7 Litres |
Related Products
Centrecoat WFT Wet Film Thickness Comb Gauge
An important tool to measure the depth of paint and coatings applied to substrates to ensure the correct thicknesses are applied.
£2.34
£1.95
Selemix 1-410 Epoxy Thinner
Thinner suitable for acrylic paints in the Selemix range of products.
From
£16.93
£14.11
Selemix 1-400 Slow Epoxy Thinner
Selemix thinner 1-400 has been specially blended for use with Selemix paints.
From
£56.81
£47.34
RODO Plastic Paint Stirrer PS380, 380mm
A plastic paint stirring stick for homogenous mixing of paint prior to use.
£2.69
£2.24
Selemix 7-861 1 Pack Synthetic One-Stage Semi-Gloss Finish
Single Pack One-Stage Semi-Gloss, apply directly to suitably prepared bare steel and old finishes, touch dry in 40-60 minutes.
From
£23.30
£19.42
Selemix 7-120 2 Pack Acrylic UHS Topcoat
Provide a very high gloss finish and excellent protection for steel in highly aggressive environments, up to C5M-low rated.
From
£150.91
£125.76
Selemix 9-020 Epoxy Hardener
Selemix Direct Hardener 9-020 for use with Selemix range of 2 pack paints.
From
£113.46
£94.55
Selemix 7-512 2 Pack Polyurethane Extra Topcoat
Provides a high gloss and very high level of chemical and atmospheric resistance in harsh environments up to C5-M & C5-I High.
From
£141.37
£117.81