Please note, all Selemix products have a delivery lead time of up to 10 days due to COVID-19.
Selemix 2.776.0350 High Temperature 350°C Resistant Topcoat is a single pack topcoat that will resist temperature up to 350°C and can be applied direct to steel.
Selemix 2.776.0350 is a single pack topcoat with a silver metallic finish that has been formulated from modified silicon resins that forms a protective film on the substrate that is heat resistant up to temperatures of 350°C, another advantage of 2.776.0600 is that it can adhere directly to suitably prepared steel.
Selemix 2.776.0350 is ideal for application onto items such as steel, mild steel, alloys, aluminium, iron, stainless steel, engines, steam pipes, boilers, radiators, vents, stoves, ovens, drying racks, engines, barbecues, commercial ovens, AGA ovens, wood burning stoves, cooling racks, brake callipers, engine bays, chimneys, exhausts, steel structure, light industrial equipment, plant equipment, generators plus many more
Selemix 2.776.0350 is best used when a sliver metallic heat resistant finish is required, Selemix 2.776.0350 is perfect for application on to aga ovens, wood burning stoves, cooling racks, brake callipers, engine bays, chimneys, exhausts, steel, mild steel, alloys, aluminium, iron, stainless steel, engines, steel structure, light industrial equipment, plant equipment, generators plus many more
If apply direct to bare steel the substrate will need to be thoroughly degreased then abraded with P320 sand paper to remove all traces of rust and to produce an abdicate key, the substrate will then need to be re-cleaned before application, if applying to aluminium prepare in the same way but apply the 2.776.0350 within 4 hours, please also note the substrate temperature will need to above 15°C before application, for best result and optimum performance it is recommended that 2 coats are applied
If being applied internally 2.776-0350 can be applied directly to the substrate, if being applied externally and corrosion protection is required please contact our technical team for further advice. Selemix 2.776.0350 can be applied via both conventional and airmix spray equipment and when applied at 25 micron dry film thickness has a theoretical coverage of 10-12 m2 per kg.
2.776.0350 will also require thinning prior to use at with Selemix thinners 1-215 at a general ratio of 20-25% volume, always consult the manufacturer’s technical datasheet prior to use for applicable mix ratio.
- Selemix 2.776.0350 high temperature resistant coating
- Resistant to temperatures up to 350°C
- Single pack silicone based
- Spray applied via conventional and airmix spray equipment
- Can be applied direct to steel
- If using externally and corrosion protection is required please contact our technical team for advice
- Substrate temperature must be above 15°C for application
- Theoretical coverage of 10-12m2 per kg when applied at a 25 micron dry film thickness
- Compatible thinners 1-215, 1-205 for large areas and 1-610 for surfaces above 30°C
- Always consult the manufacturer’s technical datasheet prior to use
- Available in Silver
- Available in 4 Kg
The manufacturers data sheets are available for download from this website. It is your responsibility to read and understand all aspects of the data sheets before you place an order and prior to application. Please pay special attention to the preparation, mixing and application temperatures of the product, cleaning of substrate and environmental factors such as temperature, rain etc. Quoted coverage rates are based on the manufacturers theoretical rates and may vary depending upon substrates absorption, texture and application. We always recommend a test is carried out to ensure suitability.
Customer further agrees that Promain have no liability for any errors or omissions contained within the Product Data Sheets and are not liable for failure due to misapplication or inadequate substrate cleaning and preparation. For more information please refer to our Terms & Conditions.